Home > Automotive > Tire Inflation & Pressure Monitors >

TST TST-507-FT-6 Flow Through Sensor Tire Pressure Monitoring System - Black & White - 6 Pack

TST TST-507-FT-6 Flow Through Sensor Tire Pressure Monitoring System - Black & White - 6 Pack
TST TST-507-FT-6 Flow Through Sensor Tire Pressure Monitoring System - Black & White - 6 Pack
 
Alternative Views:


TST Tire Pressure Monitoring System, rv tire pressure monitor, motorhome tire pressure monitor
: $396.99
Part Number: 507TPMSFT6
Manufacturer: TST

Quantity in Stock :6

Free Shipping
Availability: In Stock
Qty:

 
TST 507 Series TPMS TST-507-FT-6 Flow Through Sensor Tire Pressure Monitoring System – Monochrome Display – 6 Sensors
Real-time tire pressure and temperature monitoring for RVs, trailers, and tow vehicles. Includes 6 flow-through sensors, signal repeater, and 3.5" grayscale display.

✓ OEM-Trusted Technology – Prevent Blowouts Before They Happen

Trusted by Major RV Manufacturers | USA-Based Support | 3-Year Warranty

Overview

The TST 507 Series is the industry standard in RV tire pressure monitoring, trusted by major RV manufacturers as factory-installed equipment. This complete 6-sensor system monitors tire pressure and temperature in real time, alerting you to dangerous conditions before they become roadside emergencies.6 SensorsFlow-ThroughRepeater Included

With flow-through sensors, you can add or release air without removing the sensor – a major convenience when adjusting tire pressure for different loads or elevations. The included signal repeater ensures reliable communication between sensors and display, even on longer RV and trailer combinations up to 105 feet.

🛡️ Why Tire Monitoring Matters

Tire failures are one of the leading causes of RV accidents. By the time you feel a problem, significant damage may have already occurred. The TST 507 system provides:

Early warning of slow leaks – catch problems while they're still fixable
Rapid leak detection – alerts for sudden pressure drops
Temperature monitoring – overheating often precedes blowouts
Fuel savings – properly inflated tires reduce rolling resistance
Extended tire life – avoid uneven wear from improper inflation

Key System Features

  • Real-time monitoring – pressure and temperature updates every 12 seconds
  • Audible and visual alerts – display auto-locks onto problem tire
  • Flow-through design – inflate/deflate without removing sensors
  • Signal repeater included – extends range up to 105 feet
  • Expandable system – monitor up to 4 vehicles and 110 total tires
  • Custom pressure settings – set high/low thresholds per axle
  • Easy tire rotation – swap sensor positions in the display software
  • Anti-theft lock nuts – secure sensors to valve stems
  • User-replaceable batteries – CR1632 lithium cells
  • 3-year warranty – with USA-based live support

✅ Flow-Through vs. Cap Sensors

Flow-Through Sensors (this system):
• Add or release air without removing the sensor
• Built-in air port for tire inflation
• Requires METAL valve stems (rubber stems may flex and fail)
• User-replaceable CR1632 batteries
• Slightly larger profile than cap sensors

Cap Sensors (sold separately):
• Must remove sensor to add air
• Works with rubber or metal valve stems
• Smaller, lighter profile
• Also has user-replaceable batteries

Monitors and Alerts For

  • Low pressure – customizable threshold (default 10% below setpoint)
  • High pressure – customizable threshold (default 20% above setpoint)
  • Rapid pressure loss – sudden leak detection
  • High temperature – default 158°F (adjustable)
  • Low sensor battery – advance warning before failure
  • Signal loss – alerts if sensor stops communicating

⚠️ Important: Metal Valve Stems Required

Flow-through sensors must be installed on metal valve stems. Rubber valve stems can flex under the weight of the sensor at highway speeds, leading to valve stem fatigue and potential failure.

If your RV or trailer has rubber valve stems, you have two options:
Upgrade to metal valve stems – typically $3-5 per stem at a tire shop
Choose cap-style sensors instead – lighter weight, works with rubber stems

Check your valve stems before ordering. Most aluminum wheels come with metal stems; steel wheels often have rubber.

Display Features

  • 3.5" widescreen grayscale display – easy to read at a glance
  • Rechargeable battery – Micro-USB charging (cable included)
  • 12V power option – plug into cigarette lighter or hardwire
  • Two mounting options – suction cup and rubber dash mount included
  • Multi-vehicle presets – monitor up to 4 different trailers
  • Auto-detect trailers – automatically reads synced vehicles in range
  • Auto-drop out of range – removes disconnected trailers from display

Signal Repeater Details

The included 507 Series Repeater amplifies sensor signals through interference and extends overall range. This is essential for longer RVs, fifth wheels, and travel trailers where the distance between rear tires and the cab can exceed the standard 34-foot sensor range.

  • Extends range to 105 feet with repeater installed
  • Waterproof design – mount inside or outside
  • 12-24V powered – connects to trailer battery or 7-way
  • No programming required – works automatically with all TST 507 products
  • Indicator light – confirms signal relay operation
  • Compact size – 2.5"H x 3"W x 0.625"D
  • 57" wire lead – with inline 2A fuse

🚗 Multi-Vehicle Monitoring

The TST 507 system can monitor your tow vehicle AND up to 4 different trailers. Simply sync each vehicle's sensors once, and the system automatically:

Detects which trailer is connected when you start driving
Drops trailers out of range from the display automatically
Switches between stored vehicle configurations with one button

Perfect for RVers who tow different trailers (travel trailer, boat, utility) with the same truck.

Installation

  1. Verify metal valve stems on all tires (required for flow-through)
  2. Thread sensor onto valve stem using included wrench
  3. Install anti-theft lock nut if desired (optional)
  4. Mount display using suction cup or dash mount
  5. Power display via USB or 12V adapter
  6. Sensors auto-pair with display (no manual programming)
  7. Mount repeater on trailer (front of trailer recommended)
  8. Wire repeater to 12V (battery or 7-way circuit)
  9. Set pressure thresholds for each axle position

Tip: Sensors do not require wheel rebalancing – they weigh less than 0.1 lb each.

About TST (Truck System Technologies)

TST set the industry standard as the first OEM factory-installed TPMS for major RV manufacturers. Their commercial-grade systems are featured on over 50 model lines from brands like Forest River, Grand Design, Keystone, and Jayco. Originally developed for tractor-trailers and commercial fleets, TST brought that same reliability and durability to the RV market.

📚 Resources & Support

TST Support:
→ tsttpms.com | tsttruck.com
→ USA-based live customer service

Expand Your System:
→ Add sensors: TST-507-FT-S2 (2-pack flow-through)
→ Additional repeaters available for multi-trailer setups

Specifications

Brand TST (Truck System Technologies)
Model TST-507-FT-6
Series 507 Series
Display Type Monochrome (Grayscale)
Display Size 3.5" Widescreen
Sensor Type Flow-Through
Sensors Included 6
Repeater Included Yes
Pressure Range 0-218 PSI
Update Frequency Every 12 seconds
Max Tires Monitored 110 (with additional sensors)
Max Vehicles 4 trailers + tow vehicle
Sensor Battery CR1632 (user-replaceable)
Display Power Rechargeable / 12V / USB
Valve Stem Requirement Metal stems only
Warranty 3 Years

Range Specifications

Without Repeater ~34 feet (line of sight)
With Repeater Up to 105 feet

Alert Thresholds (Default)

Low Pressure 10% below setpoint
High Pressure 20% above setpoint
High Temperature 158°F (70°C)

All thresholds are user-adjustable via display settings.

Kit Includes

  • 3.5" Grayscale Widescreen Display
  • 6 Flow-Through Sensors
  • 507 Series Signal Repeater
  • 2 Installation Wrenches
  • Anti-Theft Lock Nuts
  • Suction Cup Display Mount
  • Rubber Dash Display Mount
  • 12V Power Adapter
  • USB Charging Cable
  • Detailed User Manual

Ideal Applications

  • Travel Trailers
  • Fifth Wheels
  • Toy Haulers
  • Class A/B/C Motorhomes
  • Dually Trucks
  • Boat Trailers
  • Horse/Livestock Trailers
  • Utility Trailers
  • Car Haulers

Related TST Products

TST-507-FT-6-C 6 Flow-Through + Color Display
TST-507-RV-6 6 Cap Sensors + Grayscale
TST-507-FT-S2 2-Pack Flow-Through Sensors
TST-507-R Additional Repeater

Color vs. Grayscale Display

This system includes the grayscale (monochrome) display. The color version (TST-507-FT-6-C) offers the same functionality with a full-color screen for easier visibility. Both displays are rechargeable and offer identical monitoring capabilities.

Manufacturer

Truck System Technologies (TST)
tsttpms.com | tsttruck.com
USA-Based Customer Support

Differences between the 507RV, 507FT and 510TPMS:
  • The 507RV and 507FT is just the type of sensors. The 507RV has regular sensors and the 507FT have flow thru that allow you to add or remove air and check tire pressure with out removing the sensors. The flow thru's are also longer than the regular sensors.

  • The differences between the 507 and the 510 are the batteries in the 507 sensors are replaceable and should be replaced once a year. The 510 batteries last 5 years and they are non replaceable, you can send them back to the manufacturer and they will replace them (for a small fee). The 510 sensors are also completely sealed, so they are waterproof, perfect for boat trailers. Lastly the 507 sensors are easier to set up, the sensor has a button to hold down and it will sync to the monitor. The 510 you have to manually enter the numbers for the sensors.

ACCESSORIES
TST Flow-Through Sensors - 2 Pack TST TST-507-R Trailer Exchange Repeater
: $100.99

Add Free Shipping
: $56.49

Add
TST TST-507-FT-S2 Flow-Through Sensors - 2 Pack TST TST-507-R Trailer Exchange Repeater


Browse for more RV Accessories in the same category as this item:

Automotive > Tire Inflation & Pressure Monitors
Automotive