Flexible cable valve that relocates your black tank dump valve handle to wherever it's most convenient to reach. A 72-inch cable with a stainless steel inner wire bends around obstacles on its way to a folding handle at your control panel.
The Valterra H40H72 is a 3" cable-actuated waste valve built for black tank applications, freeing your interior layout from being constrained by where the physical valve sits. A 72-inch cable with a stainless steel inner wire routes the control to a folding handle at your bulkhead or control panel, bending around obstacles along the way.
With a 3" hub x 3" spigot fitting configuration, this valve is sized for black water tank drain lines. It ships fully assembled and is marine rated in addition to standard RV use.
Frees your valve handle from a fixed, hard-to-reach spot
Bends around obstacles to reach your control panel
Sized for black water tank drain lines
Designed for easy bulkhead installation
This valve uses a hub x spigot fitting configuration (3" on both ends) — Valterra's product listing does not describe a "spring fitting" as a fitting type; the cable itself has a stainless steel inner wire. SKU: H40H72 | UPC: 019079040725 | Cable Length: 72"
This valve ships fully assembled — installing it typically requires partially disassembling the unit to route the cable through walls or support beams. Some installers note that warranty coverage may not apply if the cable run isn't kept relatively straight, so plan your routing path before starting the install and take photos of your old valve's orientation as a reference.
In The Box: • Valve Body • 72" Cable with Folding Handle