Home > Lippert Repair Parts > Electric and Hydraulic Slide-Out Parts >

Lippert 140514 3-Room Hydraulic Slide-Out IRC with Plate Assembly Replacement

Lippert 140514 3-room hydraulic slide-out IRC with plate assembly replacement for RV slide-out systems
Lippert 3 Slide-Out Room IRC With Plate Assembly
 
: $198.54
Part Number: 140514
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :11

Free Shipping
Availability: In Stock
Qty:

 
LippertPart 1405141-Year WarrantyLippert 140514 -- 3-Room Hydraulic Slide-Out IRC with Plate Assembly

When your RV's hydraulic slide-out system stops responding or behaves erratically, the Integrated Relay Center (IRC) is often the culprit. The Lippert 140514 is the factory-correct replacement IRC and plate assembly engineered for 3-room hydraulic slide-out configurations, restoring reliable in/out operation without workarounds or splicing.

Factory-Correct IRC Replacement for 3-Room Hydraulic Slide Systems

Lippert Components is the dominant OEM supplier for RV slide-out systems in North America, and the 140514 IRC assembly is built to the same specifications as the original unit installed at the factory. If your coach uses a Lippert 3-room hydraulic slide-out system and you're experiencing rooms that won't extend, won't retract, or throw fault codes, this assembly addresses the root cause at the control level.

The IRC -- Integrated Relay Center -- manages the directional valve signals and relay logic that tell each hydraulic room when and how to move. Combined with the mounting plate, this is a drop-in replacement that connects to your existing harness without custom wiring.

3-Room System Specific

Engineered specifically for Lippert hydraulic slide-out systems controlling three independent slide rooms -- not a universal unit.

Complete Plate Assembly

Includes the IRC module and mounting plate as a matched set, so you replace the entire assembly rather than individual components.

OEM Harness Compatible

Plugs into the existing Lippert wiring harness. No splicing or adapter wiring required for a direct swap on compatible systems.

1-Year Warranty

Backed by Lippert's limited 1-year manufacturer warranty for defects in materials and workmanship.

What Is the IRC and Why Does It Fail?

The IRC (Integrated Relay Center) is the electrical heart of Lippert's hydraulic slide-out system. It receives commands from the wall switch or control panel, then activates the correct hydraulic valves to extend or retract each room in sequence. Relay contacts inside the IRC can wear, corrode, or stick -- especially in coaches that see frequent cycling or harsh environments. When the IRC fails, symptoms include:

  • One or more rooms refusing to move in either direction
  • Rooms that extend but will not retract (or vice versa)
  • Intermittent operation or slow/erratic movement not caused by low hydraulic fluid
  • Blown fuses that keep returning after replacement
  • No response from the wall switch with confirmed 12V power at the panel
Direct-Replacement Advantage: Because the 140514 is a Lippert OEM assembly, it maintains the same connector locations, mounting footprint, and relay logic as the original. Technician or DIY installation time is minimized compared to adapting an aftermarket relay board.

Installation Overview

Replacing the IRC is a straightforward swap for anyone comfortable working with 12V DC wiring in an RV. The general process involves:

  • Disconnecting shore power and confirming 12V house battery is isolated before working in the electrical bay
  • Locating the existing IRC -- typically mounted near the hydraulic pump in a basement compartment or utility bay
  • Photographing or labeling all harness connectors before removal
  • Unbolting the plate from its mounting surface and unplugging the connectors
  • Mounting the new 140514 assembly in the same location and reconnecting all harness plugs
  • Testing each room individually before closing up the compartment
Before Replacing the IRC: Confirm the fault is actually in the relay center and not in the hydraulic pump motor, a stuck directional valve, or low fluid level. IRC replacement will not correct mechanical or fluid-related issues. Check Lippert's diagnostic guide for fault code interpretation if your coach has a digital control display.
System Compatibility Note: This IRC assembly is designed for Lippert 3-room hydraulic slide-out systems. It is NOT interchangeable with Lippert's electric (rack-and-pinion or cable-drive) slide systems, 1-room, 2-room, or 4-room hydraulic variants, or competing brands' hydraulic systems. Confirm your coach uses a 3-room Lippert hydraulic configuration before ordering.
Maintenance Tip: After installation, check the hydraulic fluid level and inspect solenoid valve screens for debris. A contaminated hydraulic system can stress a new IRC. Lippert recommends AW32 or equivalent hydraulic fluid for most coach applications.

Product Specifications

ManufacturerLippert Components
Part Number140514
Product TypeIRC with Plate Assembly
Application3-Room Hydraulic Slide-Out System
Weight2 lbs.
WarrantyLimited 1-Year Manufacturer Warranty

What's Included

IRC ModuleYes -- Integrated Relay Center control unit
Mounting PlateYes -- pre-assembled to IRC
Wiring HarnessNot included -- reuse existing OEM harness
HardwareMounting fasteners may vary; verify before removal

Compatibility Reference

System TypeLippert hydraulic slide-out, 3-room configuration
Compatible BrandsLippert OEM hydraulic slide systems only
Not Compatible WithElectric slide systems, 1-, 2-, or 4-room hydraulic variants, non-Lippert systems

Shipping and Handling

Ship WeightApproximately 2 lbs.
Ships ViaStandard ground parcel
Important Information
  • This part is designed exclusively for Lippert 3-room hydraulic slide-out systems. Installing it on a different configuration will not work and may damage your system.
  • Disconnect all power sources -- including house batteries -- before removing or installing the IRC assembly.
  • Do not attempt IRC replacement while any slide room is in a partially extended position. Fully retract or fully extend all rooms before beginning work.
  • Lippert's limited 1-year warranty covers manufacturing defects only. Damage from improper installation, incorrect application, or electrical surges is not covered.
  • If your coach is still within its OEM warranty period, consult your dealership before replacing components, as self-service on slide-out systems may affect coverage.


Browse for more RV Accessories in the same category as this item:

Lippert Repair Parts > Electric and Hydraulic Slide-Out Parts
Lippert Repair Parts


$93.49