Give your RV patio a fresh start with this heavy-duty 13.5 oz vinyl replacement awning fabric from Lippert. Engineered to fit 14 ft Solera, Dometic, and Carefree awning assemblies, this solid black fabric resists cracking in cold climates, sheds water at heat-welded seams, and installs without replacing your entire roller assembly. Made to order -- measure carefully before purchasing.
Awning fabric takes a beating -- UV exposure, wind, rain, and temperature swings wear out even quality fabric over time. Lippert's Solera replacement fabric is a direct, cost-effective alternative to replacing your entire awning system. At 13.5 oz per square yard, this is a commercial-weight vinyl that handles the elements without sagging or cracking.
This fabric is solid black on both the topside and underside, providing a clean, uniform look from every angle. The 8-foot projection keeps your campsite shaded while the heat-welded seams prevent water infiltration at the fabric's most stress-prone points.
Commercial-weight vinyl fabric resists tears, UV degradation, and moisture without adding unnecessary bulk to your roller assembly.
Fabric remains flexible and crack-resistant in extreme cold -- a critical spec for four-season campers and northern climates.
Seams are fused under heat and pressure rather than sewn, eliminating needle holes and reinforcing the fabric at its highest-stress points.
Includes a poly cord sewn into the underside hem for an optional LED light track strip -- light track and lights are sold separately.
This fabric is sized for a 14 ft awning assembly. The fabric width is 13'1" -- approximately 11 inches shorter than the full awning assembly width. This is normal and expected: the fabric is designed to sit inside the end caps of the awning hardware, not span the full rail-to-rail measurement.
Always measure your existing fabric width (not your awning rail width) when selecting a replacement. If your current fabric measures close to 13'1", this is your correct replacement size.
This Lippert Solera replacement fabric is designed to fit awning hardware from the following leading brands:
The fabric uses standard hem profiles and poly cord sizing compatible across these three platforms. If you are unsure of your awning brand, check the end cap or roller tube for a label, or match the existing fabric's hem style before ordering.