Remote interface panel kit for Xantrex PROsine 1000 and PROsine 1800 stand-alone inverters. Allows the inverter's standard LCD display panel to be relocated to a more convenient location using the included 30-foot communications cable.
The Xantrex 808-1800 PROsine Remote Interface Panel Kit is designed for PROsine 1000 and PROsine 1800 stand-alone inverter models. It allows the inverter's standard LCD panel to be removed from the inverter and mounted remotely in a more accessible viewing and control location.
This is useful in RV, marine, and mobile power installations where the inverter is mounted in a storage bay, utility compartment, cabinet, or other hard-to-reach location. The included 30-foot cable gives installers more flexibility when routing the LCD panel to a convenient interior control point.
Allows the standard PROsine LCD panel to be mounted away from the inverter
Includes 30 feet / approx. 10 meters of communications cable for remote mounting
Built-in ON/Bypass switch provides basic inverter control access
Telephone-style cable connection simplifies installation in compatible systems
The 808-1800 kit is useful when the PROsine inverter is mounted in a location where the built-in LCD panel is difficult to access or read. It lets the display panel be moved to a cabinet face, control area, equipment wall, or other convenient location. This kit is intended for PROsine 1000 and 1800 stand-alone inverter models. It should not be assumed compatible with other Xantrex inverter/charger families.
• One Xantrex 808-1800 PROsine remote interface panel • 30 ft / approx. 10 m telephone-style cable
This kit allows the standard PROsine LCD panel to be removed from the inverter and mounted remotely. The interface panel mounts into the existing cavity in place of the standard LCD panel, while the included cable connects the relocated LCD panel to the inverter. Confirm cable routing, panel location, and access clearance before installation.
Xantrex 808-1800 is intended for PROsine 1000 and PROsine 1800 stand-alone inverter models. It is not listed as a universal remote for Freedom, Freedom X/XC, TRUEcharge, PROwatt, or other Xantrex product families. If you have a PROsine inverter/charger or a different Xantrex series, verify the correct remote or interface panel before ordering.
The Xantrex 808-1800 PROsine Remote Interface Panel Kit is used to relocate the standard LCD panel on compatible PROsine 1000 and PROsine 1800 stand-alone inverters. It includes a 30 ft cable, telephone-style connection, LED status indicator, and ON/Bypass switch.