Stop stabilizer jacks from sinking into soft or loose ground. The Camco FasTen pad system gives your jacks a wider, more stable footprint with a patented T-handle design that makes placement, removal, and storage faster than fumbling with loose pads.
Soft grass, gravel, dirt, and sandy pull-throughs all share one problem: stabilizer jacks dig in, sink, and shift. The Camco 44565 FasTen pads spread the load across an 11 x 8.5-inch surface, keeping your jacks planted and your rig steady whether you are parked for a weekend or a full season.
Each pad adds exactly 1 inch of lift, so stacking two pads gives you 2 inches of additional height adjustment at that corner. The pads nest together using the patented FasTen T-handle, turning all four pieces into a compact, easy-to-carry unit that stows cleanly in a basement compartment or gear bag.
11 x 8.5-inch footprint distributes jack load across soft, uneven, or loose ground to prevent sinking and shifting.
Each pad adds 1 inch of lift. Stack pads to gain additional height adjustment at any corner of your rig.
All four pads nest and lock together via the FasTen T-handle for one-handed carry and compact storage.
Engineered for use with Camco FasTen stack jack and stabilizer jack systems. Pads interlock with matching FasTen components.
Stabilizer jacks are designed to reduce rig movement, not to bear the full weight of your trailer or motorhome -- but they still need a stable base to do their job. On firm pavement these pads are optional; on any softer surface they become essential gear.
The 44565 pads are part of the Camco FasTen ecosystem. They are designed to work with Camco FasTen stack jacks and compatible stabilizer jack systems. The T-handle nesting feature functions specifically with other FasTen-compatible pads and jacks. Standard scissor jack and tongue jack setups can also benefit from the wider footprint, though the locking nest feature requires FasTen-series components.
Need more than 1 inch of lift at a given corner? Stack two or more 44565 pads on top of each other. Each additional pad adds another inch of height. Because the pads nest and lock together, a stacked set stays aligned under the jack foot rather than sliding apart -- a common problem with flat, unlocking pads.
Note: Stack jacks, leveling blocks, wheel chocks, and tongue jack pads are NOT included. This listing is for the 4-pack of stabilizer jack pads only.