Stop guessing during hookup. The Camco 25583 bracket positions your AccuLevel bubble level directly on the kingpin box of most fifth wheel trailers so you can read side-to-side and front-to-back level at a glance -- without crawling under the rig or squinting at a separate gauge across the lot.
The AccuLevel system is one of the most popular leveling references for RV owners, but getting it positioned where you can actually see it during slideout and leveling jack operation makes all the difference. This bracket solves that problem by giving you a dedicated, fixed mount point at the front of the trailer -- right on the kingpin box -- where the level is visible from the hitch area as you work the jacks.
Compatible with most fifth wheel kingpin (pin box) assemblies, the 25583 bracket attaches with included screws and requires no drilling beyond the provided fastener holes. Once mounted, your AccuLevel stays put trip after trip, giving you a consistent reference point every time you set up camp.
Designed to mount on most standard fifth wheel kingpin boxes without modification or custom drilling.
Comes with the mounting screws needed for installation -- no separate hardware trip required.
Fixed bracket location means your level reads the same way every hookup, eliminating setup variables.
Positions the AccuLevel where it can be seen from the hitch area while operating leveling jacks.
The Camco AccuLevel is a dual-axis bubble level that reads pitch (front-to-back) and roll (side-to-side) simultaneously. The 25583 bracket is the mounting hardware that affixes the AccuLevel unit to your fifth wheel kingpin box structure. The level itself reads true to the trailer frame, giving you an accurate reference as you raise or lower each corner with your stabilizer or leveling jacks.
Because the kingpin box is a rigid, fixed part of the trailer frame assembly, mounting the level there gives you a stable, vibration-resistant reading surface -- much more reliable than a stick-on pad on a flexible surface.
This listing is for the mounting bracket only (Camco 25583). The AccuLevel bubble level instrument is sold separately. If you need the complete leveling setup, look for Camco AccuLevel part numbers in the 25570 and 25575 family for the level itself, then add this bracket for fifth wheel installation.
This bracket fits most standard fifth wheel kingpin box profiles. Aftermarket heavy-duty or replacement pin boxes with non-standard profiles (such as certain air-ride or slider pin box assemblies with very different flange geometry) may require verification before ordering. If your pin box has been replaced with a custom or oversized aftermarket unit, confirm the mounting surface matches a standard pin box flange before purchasing.