Direct replacement thermoformed polycarbonate square skylight for 14"×14" roof openings. Smoke black tint. 18-1/2"×18-1/2" outer flange. 3.5" bubble height. No metal flanges. Approved elastomeric sealant included. Fits Class A, B, C motorhomes, travel trailers, fifth wheels, and campers. Made in the USA.
The Specialty Recreation SL1414S is a direct replacement square bubble skylight for RVs, motorhomes, and trailers with standard 14"×14" roof openings. One advantage over many competing skylights: the correct elastomeric/urethane sealant for polycarbonate installation is included in the box — no hunting for compatible sealant separately, and no risk of reaching for an incompatible product that could damage the dome.
The high-quality thermoformed polycarbonate construction provides durable UV and impact resistance, while the smoke black tint reduces interior glare and heat gain. A smooth, glossed surface sheds dirt and grime easily, keeping the skylight looking clean. No metal flanges are used — the polycarbonate flange sits directly on the roof surface for a clean, low-profile installation.
Correct elastomeric/urethane sealant for polycarbonate installation included — no separate sealant purchase needed
Reduces glare and solar heat gain while admitting comfortable natural light — ideal for living areas, bedrooms, and bathrooms
High-performance polycarbonate construction — durable, long-lasting, and easy to clean with a smooth glossed surface
Specialty Recreation manufactures their skylights domestically — fits Class A, B, C motorhomes, travel trailers, fifth wheels, and campers
The Specialty Recreation Inc. product warranty covers defects in workmanship and materials for 1 year from the date of purchase, when the product is used for its intended purpose under normal conditions. Warranty does not apply to damage caused by improper installation. Note: Some product listings reference a 90-day warranty term; Specialty Recreation's published warranty policy is 1 year. Refer to the warranty documentation included with your unit for the applicable term.
Specialty Recreation skylights are sized by two measurements — both must be verified before ordering: 1. Rough Opening (Hole Size): The actual hole cut in your roof. This skylight requires a 14" L × 14" W rough opening. 2. Flange Dimension (Outer Size): The total outside dimension of the skylight flange. This skylight is 18-1/2" L × 18-1/2" W. When replacing an existing skylight, also confirm the flange of the old unit is similar in size — the new flange must cover any sealant marks or weathered areas on the roof surface around the opening.
• (1) SL1414S Smoke Black Square Skylight • (1) 10 oz tube of approved elastomeric sealant • Care instructions • Installation instructions NOT Included: • Interior garnish/trim ring (sold separately) • Mounting screws/hardware
Use Only the Included Sealant: The approved elastomeric/urethane sealant included with this skylight is specifically compatible with polycarbonate. Do not substitute self-leveling lap sealants — these contain chemicals that can damage polycarbonate. No Metal Flange: The polycarbonate flange sits directly on the roof surface — no metal frame or mounting channel required. Interior Garnish: If you need a finished interior ceiling opening, the interior garnish must be ordered separately and must match the exact hole size (14"×14"). Replacing an Existing Skylight: Remove all old sealant from the roof surface before installing. The new flange must sit flat and clean for a watertight seal.