Home > Jacks & Levelers > Socket Jenie >

Socket Jenie LVSG-875 For Fleetwood And Coleman Pop-Up Campers Before 2005
Socket Jenie LVSG-875 For Fleetwood And Coleman Pop-Up Campers Before 2005
Socket Jenie For Fleetwood And Coleman Pop-Up Campers Before 2005


 
Alternative Views:


Normally: $25.95
MFG P/N: LVSG-875
MFG: Custom Cylinders


Quantity in Stock :11
Availability: Ships Out By Ground Only
Product Code: LVSG-875
Qty:

DESCRIPTION
 
The Socket Jenie LVSG-875 is designed for raising and lowering pop-up camper roofs that use a 7/8" round crank with a T-end. These are known to have been used on Fleetwood and Coleman pop-up campers manufactured prior to 2005.
  • Requires a 1/2" drill chuck to be used with a low RPM/high torque drill motor.
    • 110V drill should not be less than 5 amps. Battery powered drill should be 24V.
  • It is recommended your drill has an extra front mounted handle to control torque needed to raise and lower your roof.
  • Free length of the socket refers to the distance the crank inserts into the camper body to operate the roof.
    • The portion of the socket that fits into the drill chuck is not included in the free length.
  • The specially machined stem is designed to prevent slipping in the drill chuck.
  • Made from steel with a corrosion resistant finish.
  • Length: 5-1/8".
  • Weight: 1 lb.
  • Lifetime Manufacturer Warranty.
Warning: Use caution due to the torque of the drill when the jack reaches home position, and the only part that can turn is the operator's arm.

Socket Jenie For Fleetwood And Coleman Pop-Up Campers Before 2005

Additional Product Information
Note: If you cannot find the socket Jenie you are looking for, please fill out this form and email it to us at sales@rvupgradestore.com and we be more than happy to help you get the one you need.
Socket Jenie Form