One of the upgrades that can make a significant difference to your comfort on the road is a modern RV thermostat. Many of us have dealt with those basic, sometimes inaccurate, factory-installed thermostats.
Today, I want to discuss enhancing your RV's climate control with a system like the Micro-Air EasyTouch. If you're looking for better temperature regulation, more features, and even the ability to check on your RV's climate remotely, this is a topic you'll find beneficial.
Over my years of RVing, I've seen technology evolve considerably, and thermostats are no exception. What used to be a simple on/off device can now be a smart hub for your RV's heating and cooling. This is a welcome change, especially when trying to maintain comfort in diverse weather conditions.
Before we talk about the upgrade, let's address what's probably already frustrating you about your current thermostat. I hear these complaints constantly from fellow RVers, and I've experienced most of them myself.
Inaccurate temperature readings. Many factory thermostats are off by 3-5 degrees or more. You set it to 72°F and find yourself sweating at what feels like 78°F, or shivering because the unit thinks it's warmer than it actually is. The cheap thermistors used in stock units simply aren't precise enough.
Wide temperature swings. Instead of maintaining a steady temperature, factory thermostats tend to let the RV get too cold before kicking on, then blast the AC until it's too cold the other direction. You end up in a constant cycle of too hot and too cold, especially at night when you're trying to sleep.
No remote monitoring. You leave your pets in the RV while you go out for dinner, and you spend the whole meal worrying. Did the AC shut off? Did the campground lose power? With a basic thermostat, you have no way to know until you walk back through the door.
Confusing controls. Some factory thermostats have cryptic button combinations and tiny LCD screens that are nearly impossible to read, especially in low light. Others are simple analog dials with no real precision at all. Neither gives you a clear picture of what your system is doing.
No scheduling capability. You can't tell a factory thermostat to cool the RV down before you return from a day trip, or to bump the heat up 30 minutes before your alarm goes off on a chilly morning. It's either on or off at whatever temperature you manually set.
If any of this sounds familiar, you're not alone. These are the exact problems that the Micro-Air EasyTouch was designed to solve.
You might be thinking, "My current thermostat works adequately, why should I upgrade?"
That's a reasonable question. However, a key insight highlights the benefit of a modern thermostat like the EasyTouch: The primary feature of the EasyTouch thermostat is the ability to monitor the temperature of your RV and adjust it from any location. This is extremely helpful for pet owners.
Consider that for a moment. If you travel with pets, as many of us do, ensuring their comfort and safety when you're away from the RV is invaluable.
Perhaps you're out hiking or exploring a town, and the weather takes an unexpected turn. With a Wi-Fi-enabled thermostat like the Micro-Air EasyTouch, you can check the temperature inside your rig and adjust the AC or heat directly from your smartphone.
That's not just convenience; it's peace of mind. I've heard from numerous fellow RVers how this feature alone made the upgrade worthwhile.
Beyond pet safety, an improved thermostat offers more precise temperature control, which can mean a more comfortable living space and potentially even some energy savings. No more drastic temperature swings – just consistent comfort.
Let me walk through some specific situations where having an EasyTouch thermostat makes a real difference. These aren't hypothetical – they come from conversations with customers and my own experience on the road.
Traveling with pets. This is the big one. You're at a national park where dogs aren't allowed on the trail. Your dog is back in the RV with the AC running. Two hours into your hike, you pull out your phone, open the EasyTouch app, and confirm the inside temp is holding at 73°F. The AC is running fine. That peace of mind is worth every penny.
Arriving to a comfortable RV. You've been out all day sightseeing in July heat. An hour before you head back, you pull up the app and drop the thermostat to 70°F. By the time you walk through the door, the RV is cool and comfortable instead of a 110°F oven.
Cold morning wake-ups. You're camping in the mountains where nights drop into the 40s. With the scheduling feature, you can program the heat to kick on 30 minutes before your alarm. You wake up to a warm RV instead of dreading that first step out of bed.
Monitoring a stored RV. If your RV is in storage or parked at a seasonal site, you can keep an eye on interior temperatures remotely. This is especially useful in winter to make sure your heating system is keeping things above freezing, protecting your plumbing and water systems.
Multi-zone comfort. For RVs with more than one AC unit, the EasyTouch lets you control zones independently. Keep the bedroom cooler for sleeping while saving energy by letting the front living area warm up a bit overnight.
Micro-Air has established a strong reputation with its EasyTouch line. These are not merely replacements; they are significant upgrades. They typically feature large, easy-to-read touchscreen displays (a notable improvement from small buttons and cryptic LCDs), and the main attraction for many is remote accessibility via Wi-Fi and Bluetooth.
I've had the opportunity to see these in action, and they are impressive. The interface is intuitive, and the ability to make adjustments without having to be directly in front of the panel is a feature one quickly appreciates.
Here's what sets the EasyTouch apart from both factory thermostats and other aftermarket options:
One of the most common questions we get is: "Which EasyTouch do I need?" The answer depends on what thermostat and HVAC system you currently have.
Micro-Air makes different EasyTouch models to replace specific factory thermostats from Dometic, Coleman-Mach, and other manufacturers. Getting the right model is essential – it needs to be compatible with your existing wiring and AC/heat pump system.
The easiest way to find your match is to use our Micro-Air EasyTouch Thermostat Selection Guide. Just look at the pictures of factory thermostats and click the one that matches what's currently on your wall. It will take you directly to the correct EasyTouch replacement.
If you're not sure which thermostat you have, or if your RV has an unusual setup, give our team a call at 866-332-7881. We help RVers match thermostats every day and can usually identify the right model from a photo of your current unit.
Upgrading your RV thermostat to an EasyTouch is generally a manageable DIY project for many RVers. Micro-Air provides good documentation, and there are plenty of resources online from fellow RVers who have completed the installation. Most installations take about 30 minutes.
Here's a general overview of the process:
Step 1: Turn off all power. This is critical. Shut off both your 12V DC system (battery disconnect) and your 120V AC shore power or generator. Never work on thermostat wiring with power connected.
Step 2: Remove the old thermostat. Most factory thermostats are held on with a couple of screws. Before disconnecting any wires, take a clear photo of the wiring connections. This is a tip I always share – that photo can save you a lot of headaches if you need to reference it later.
Step 3: Connect the new EasyTouch. Follow the wiring instructions included with your specific EasyTouch model. The connections are straightforward, and Micro-Air includes detailed diagrams for each thermostat type they replace.
Step 4: Mount and power up. Secure the EasyTouch to the wall (it includes mounting hardware), restore power, and follow the on-screen setup. The thermostat will walk you through initial configuration.
Step 5: Set up Wi-Fi and Bluetooth. Once the thermostat is running, connect it to your phone for remote access. We've put together a detailed EasyTouch WiFi & Bluetooth Setup Guide to walk you through this step by step.
If you're not comfortable with electrical work, having an RV technician handle the installation is a sound decision. The peace of mind knowing it's done correctly is worth it.
The EasyTouch line covers most major RV HVAC systems including Dometic, Coleman-Mach, and Airxcel units. The key is matching the correct EasyTouch model to your specific factory thermostat. Use our EasyTouch Thermostat Selection Guide to find your match, or call us at 866-332-7881 if you need help.
In most cases, no. The EasyTouch is designed as a direct replacement that uses your existing thermostat wiring. Some models include a wiring harness adapter that connects directly to your current wires. The most important thing is choosing the correct model for your system.
The EasyTouch can connect to any available Wi-Fi network, including campground Wi-Fi, a mobile hotspot from your phone, or a dedicated RV Wi-Fi router. For remote monitoring when you're away from the RV, you'll need the thermostat connected to a Wi-Fi network with internet access. When Wi-Fi isn't available, you can still control the thermostat via Bluetooth when you're within range (about 30 feet). Our WiFi & Bluetooth Setup Guide covers all the connection options.
Yes. The EasyTouch supports heat pump operation and will automatically manage the switchover between heat pump mode and other heating sources based on your settings and outdoor conditions.
The EasyTouch continues operating normally as a standalone thermostat. It maintains your last temperature setting and any programmed schedule. You just temporarily lose remote access until the Wi-Fi reconnects. Your RV's climate control is never dependent on an internet connection.
The touchscreen has adjustable brightness and a night mode that dims the display so it won't light up your bedroom. You can also set it to turn off the screen entirely when not in use and just tap to wake it.
Most RVers with basic DIY skills handle the installation themselves in about 30 minutes. It's a direct swap – remove the old thermostat, connect the wires to the new one using the included instructions, and mount it on the wall. If you're not comfortable working with wiring, any RV technician can do the job quickly.
If you're looking to make your RV life a bit more comfortable, convenient, and even safer for your pets, upgrading your thermostat to a Micro-Air EasyTouch is an investment I highly recommend considering. The ability to monitor and adjust your RV's temperature from anywhere with an internet connection is more than just a sophisticated feature – it's a practical solution for modern RVing.
Take a look at the options, double-check compatibility with your RV, and imagine the comfort and control you'll gain. It's one of those upgrades that, once you have it, you'll wonder how you ever managed without it.
Ready to find the right EasyTouch for your RV? Visit our Micro-Air EasyTouch Thermostat Selection Guide to match your current thermostat to the correct replacement. And once you've installed your new thermostat, our WiFi & Bluetooth Setup Guide will get you connected in minutes.
I'm Bill Rowell, the founder of RVupgrades.com. In 2002, I launched the business to help fellow RV enthusiasts find unique and hard-to-find products. Over the years, it's grown to offer more than 15,000 items, with a warehouse in Eastlake, Ohio. Having owned and repaired nearly every type of RV, I bring over two decades of hands-on experience to the table. For me, this isn't just a business – it's a passion and a way of life that I love sharing with the RV community.
Follow me on LinkedIn