Home > Electrical > Battery Chargers >

BatteryMINDer 128CEC1 12V Battery Charger, Maintainer, Desulfator, Conditioner
BatteryMINDer 128CEC1 12V Battery Charger, Maintainer, Desulfator, Conditioner
BatteryMINDer 128CEC1 12V Battery Charger, Maintainer, Desulfator, Conditioner

Alternative Views:

Normally: $161.49
MFG P/N: 12248
MFG: BatteryMINDer
UPC #: 084599124811

Quantity in Stock :11

Availability: In Stock
Product Code: 12248-ABS

DESCRIPTION Instructions
The BatteryMINDER Model 128CEC1 is an upgrade of the old model 12248 and is designed as a 12V Battery Charger, Maintainer, Desulfator, Conditioner that extends both the performance and life of all type / size / brands of 12-Volt batteries. These include all Flooded, deep cycle, maintenance free, sealed, AGM and Gel. Whats new in the 128CEC1 is the Auto-Temp Compensation Sensor installed in the unit which guarantees to never overcharge/undercharge your batteries between the temperatures of 33°F to 130°F. Five Stage Charger: 1st - Test-qualify-accept or reject battery, 2nd - Soft-start or Max. Charge rate (depending on battery’s condition), 3rd - Absorption - completes charge to ensure 100% capacity, 4th - Test – determines if battery will hold charge or needs further desulfation, 5th - Maintenance-Float (keeps battery at full charge and continues to de-sulfate if needed.
  • Guaranteed to never overcharge/undercharge. (33°F to 130°F)
  • Push-button Selection for ALL battery types and charge rates 100% Full - Time
  • U.S. Patented Pulse-type Desulfation keeps battery free of sulfate or dissolves sulfate completely in older batteries
  • Detects and rejects batteries with bad cells
  • Maximize battery life and capacity, recovers weak batteries.
  • Diagnoses battery’s condition / state-of-charge
  • Recovers weak or deeply discharged batteries: including flooded, maintenance-free, valve regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
  • Maintain up to 6 batteries at a time. (Requires Y-Connectors 210AY and RTA2415 Ring Terminals - sold separately).
  • Auto-Restart after power failure
  • Intrusion protected from water and dust per IEC STANDARD IP65.
  • Bad cell detection with auto-shutdown.
  • Includes Short circuit, spark, reverse polarity protection, thermal runaway protection, automatic D/C disconnect on A/C failure and quick-connect/disconnect fused alligator clip assembly
  • California CEC Approved.
  • Automatically detects input AC power.
  • ECO-mode with hi-efficiency / low power consumption
  • Ambient temperature compensation.
  • Built-in temperature sensor automatically adjusts charge rate to ensure full-charge. (as low as 0°F or as high as 130°F)
  • 18 LED indicators show state-of-charge and important status mode / battery condition
  • Rugged, vibration-resistant construction.
  • 6' AC cord, 6' DC cord with quick connector (SAE).
  • Case Type: wall or vehicle mountable.
  • Output Volts (DC): 12v.
  • Output Current (Amps): selectable 2, 4 or 8.
  • Input Voltage (AC):90-140v.
  • Input Current (Amps): 2.
  • Minimum Battery Voltage: 3v.
  • Operating Temperature: 0°F - 130°F.
  • Dimensions: 7 1/4" x 4 1/2" x 2 1/4".
  • Manufacturers warranty: 1 Year 100% Money Back Guarantee, 5 Year "No Hassle" Warranty.
  • 6' power cord.
  • 6' DC cord.
  • 2' Battery Clip Cord Set with SAE Connect
  • Ring Terminal Cord Set with SAE Connect
* Not for lithium, nickel–cadmium (NiCad), nickel–metal hydride (NiMH) or aircraft batteries.

Battery Charger Comparison Chart

BatteryMINDer 12V Battery Charger

Additional Product Information
  • Prevent or eliminate all sulfation in your batteries over their entire lifetime.
  • Charge and maintain (over weeks-months of non-use) your batteries to 100% of their full rated capacity, without the fear of ever under/over charging them.
  • Charge batteries, regardless of size / type or brand, faster (70 - >100%) than any known constant voltage or two-stage charger on the market, regardless of price*. It also simultaneously provides full-time (100%) desulfation pulses to your battery to prevent or eliminate sulphate crystal build-up on its charge plates.
  • Extend the average battery’s life by more than double by never allowing the battery, regardless of temperature or condition to be over / undercharged when used with our “at the battery temperature sensor”. (No charger, regardless of price or claims, can make this claim, unless it also has “at the battery” temperature sensing capability).
  • Be guaranteed to meet or exceed all our claims over its entire lifetime or we will repair replace it anytime within five years from the date you purchased it. This guarantee is in addition to our 100% money back guarantee and five (5) year “no hassle” repair or replacement warranty.