Brass 45-degree hose elbow with an easy-grip swivel connector for compatible RV fresh water inlets, campground spigots, outdoor faucets, washing machine hookups, and standard garden hose connections. Helps reduce hose kinking and strain on RV water intake fittings.
The Camco 22605 is a 45-degree brass hose elbow designed to connect between a standard water hose and a compatible RV fresh water inlet, outdoor faucet, campground spigot, or washing machine-style hose connection. The angled design helps reduce sharp bends where a straight hose connection may kink or pull against the fitting.
This hose elbow includes an easy-grip swivel connector to make installation and removal easier by hand. It is especially useful at RV city water inlets where a heavy or stiff hose can place unwanted strain on the inlet fitting.
Redirects hose angle to reduce kinking and connection strain
Solid brass fitting for regular RV and hose hookup use
Gripper design helps with hand tightening and removal
Simple elbow fitting only; does not include an on/off valve
Thread the elbow onto the compatible RV water inlet, faucet, or hose connection, then attach the water hose to the opposite end. Hand-tighten first and check for leaks before applying full water pressure. Use a good hose washer and avoid over-tightening, especially on plastic RV city water inlets.
The Camco 22605 is commonly used on RV city water inlets, campground water hookups, outdoor faucets, garden hose connections, washing machine hookups, and other compatible fresh water hose setups. It is a practical choice where a straight hose connection creates strain, kinking, or awkward hose routing.
• One Camco 22605 45-degree brass hose elbow with gripper • Packaging/components as supplied by manufacturer
Confirm the connection uses standard garden hose-style threads and has enough clearance for a 45-degree elbow fitting. This is a basic angled fitting only. It does not include a shutoff valve, pressure regulator, filter, or check valve.
Hose connections can vary by thread condition, washer condition, inlet style, and available clearance. If the connection leaks after installation, inspect the hose washer, faucet threads, RV inlet threads, and mating surfaces before assuming the elbow is the issue.
The Camco 22605 is a brass 45-degree fresh water hose elbow with an easy-grip swivel connector for compatible RV fresh water inlets, campground spigots, outdoor faucets, washing machine hookups, and standard hose-style connections. It helps reduce hose kinking and strain on RV water intake fittings. This fitting does not include a shutoff valve. Verify thread style, hose routing, inlet clearance, washer condition, thread condition, regulator placement, and fresh water use before ordering.