Quick-connect drill adapter with 3/4" hex socket and 1/4" hex shank for raising and lowering standard RV scissor jacks faster than hand cranking.
The Camco 57364 scissor jack socket is designed to make raising and lowering RV scissor jacks quicker and easier. Instead of using a manual hand crank, this adapter snaps into a compatible drill or 1/4" quick-connect chuck so the drill can do the work.
The socket fits standard 3/4" hex drive scissor jacks and features a 1/4" hex quick-connect shank. Its one-piece forged carbon steel construction and zinc-plated finish provide strength and corrosion resistance for repeated RV setup use.
Allows a compatible drill to raise and lower scissor jacks faster
Fits standard RV scissor jacks with 3/4" hex drive heads
1/4" hex shank fits compatible quick-connect drill chucks and extensions
Forged carbon steel with zinc plating for durability and corrosion protection
This adapter is intended for scissor jacks with 3/4" hex drive heads. It is not a replacement for safe jack operation. Use a properly sized drill, operate slowly, keep the socket fully seated, and do not overextend or overload the jack.
Before Starting: Confirm the scissor jack uses a 3/4" hex drive head and inspect the jack for damage, binding, or corrosion before operating it with a drill. Basic Use Steps: 1. Confirm Fit: Make sure the jack drive head is 3/4" hex and that the socket seats fully. 2. Attach to Drill: Insert the 1/4" hex shank into a compatible quick-connect chuck or drill adapter. 3. Seat Socket: Place the 3/4" socket fully over the scissor jack drive head. 4. Operate Slowly: Run the drill at a controlled speed to raise or lower the jack. 5. Watch Jack Travel: Stop before the jack reaches its travel limits or begins to bind. 6. Check Stability: Confirm the jack is properly positioned and supporting/stabilizing the RV as intended. 7. Store Tool: Remove the socket from the drill and store it with RV leveling or setup tools.
Package Contents: • 1 Camco 57364 3/4" quick-connect scissor jack socket NOT Included — May Also Need: • Drill or driver • 1/4" quick-connect chuck or extension • Scissor jack • Leveling blocks or jack pads • Wheel chocks This listing is for the scissor jack socket adapter only. Use with compatible 3/4" hex drive scissor jacks and a suitable drill or driver.
Before use, consider the following: • Scissor jack drive head size • Drill speed and torque settings • Jack condition and lubrication • Ground surface and jack pad placement • Whether the RV wheels are properly chocked Why this matters: A drill adapter can speed up setup, but proper jack alignment, stable footing, and controlled drill operation help prevent binding, slipping, or damage.
Match this adapter by jack drive size and drill connection. It is intended for scissor jacks with 3/4" hex drive heads.
The socket adapter speeds up scissor jack operation, but safe jack placement, stable ground, wheel chocking, and controlled drill use are still important.