Stop your Dometic Penguin rooftop AC from running warm or shutting down on hot days. This is the genuine OEM replacement condenser fan motor -- part number 3309333.007 -- designed as a direct drop-in for Penguin 11,000 and 13,500 BTU rooftop air conditioner units. Rated at 115V AC, 3.3 amps, and 1/4 HP at 1650 RPM, it restores proper airflow across the condenser coil so your rig cools the way it should.
When the condenser fan motor fails on a Dometic Penguin, the compressor loses the airflow it needs to reject heat. The result is poor cooling, high-pressure lockout trips, or a unit that runs constantly without bringing temperatures down. Replacing the motor with the correct OEM part -- not a generic substitute -- ensures the blade speed, shaft diameter, and rotation direction all match what Dometic engineered for these units.
Part number 3309333.007 is the factory-specified motor for Penguin 11,000 BTU and 13,500 BTU models. It ships ready to install with dual D-shaft configurations to accommodate the condenser fan blade attachment used across these platforms.
Engineered specifically for Dometic Penguin 11,000 and 13,500 BTU rooftop units. No modification or adapter required for compatible models.
Two shaft options -- 3-3/8 in. and 6 in. lengths, both 1/2 in. diameter -- accommodate different blade mounting configurations within the Penguin family.
115V AC operation at 1650 RPM and 3.3A draw. Sized and balanced to move adequate air across the condenser coil in high-ambient rooftop conditions.
Backed by Dometic's limited 2-year warranty. Buying OEM protects your warranty coverage on the air conditioner assembly as well.
The condenser fan is responsible for pulling ambient air across the condenser coil on the outside of the AC unit. If this motor slows down, seizes, or fails entirely, the refrigerant cannot shed heat efficiently. Common symptoms of a failing condenser fan motor include:
Replacing this motor is a straightforward rooftop job for an experienced DIY RVer or technician. The basic process involves removing the Penguin shroud, disconnecting the wiring harness, unbolting the motor mount plate, swapping the motor, transferring the fan blade to the appropriate shaft, and reassembling. Always disconnect shore power and confirm the capacitor is discharged before handling any AC components.
This motor is specified for Dometic Penguin rooftop air conditioner units at both the 11,000 BTU and 13,500 BTU cooling capacities. If you are unsure whether your unit uses part 3309333.007, locate the data plate on the AC unit (typically inside the shroud or on the unit body) and cross-reference the model number against Dometic's parts breakdown for your specific Penguin model before ordering.