Replacement L-pin for Fastway e2 weight distribution hitch systems. This pin helps retain the spring arm on the trailer-frame L-bracket and is used with Fastway e2 round bar and trunnion bar setups.
The Fastway 92-03-9205 e2 L-Pin is a replacement retaining pin for Fastway e2 weight distribution hitch systems. It is used at the trailer-frame L-bracket to help keep the e2 spring arm properly positioned during towing.
This replacement L-pin is useful when the original pin is missing, bent, damaged, worn, or corroded. The Fastway e2 hitch system uses two L-pins per hitch setup, one on each side of the trailer frame. This listing is for one replacement L-pin.
Replacement L-pin for Fastway e2 weight distribution hitch systems
Works with compatible Fastway e2 round bar and trunnion bar hitch setups
Helps retain the spring arm on the trailer-frame L-bracket during towing
Useful for replacing a missing, bent, worn, damaged, or corroded L-pin
This part is a Fastway e2 weight distribution hitch L-pin. It is not a leveling jack pin, stabilizer jack pin, or general RV jack hardware. For a complete e2 hitch setup, the L-pin must be used with the correct L-pin clip. The matching replacement clip for this L-pin is Fastway 92-04-9208.
Replace the L-pin if the original pin is missing, bent, cracked, heavily corroded, or no longer fits securely at the L-bracket. Missing Pin: Do not tow if the spring arm is not properly retained at the L-bracket. Bent or Damaged Pin: A distorted pin may not seat correctly and can interfere with proper hitch setup. Heavy Corrosion: Rust or pitting can weaken the pin and make installation or removal difficult. Used Hitch Setup: A replacement L-pin is helpful when restoring a used e2 hitch with missing or questionable hardware.
Installation Steps: 1. Park Safely: Park the tow vehicle and trailer on level ground before working around the hitch 2. Position the Spring Arm: Place the Fastway e2 spring arm onto the trailer-frame L-bracket according to the e2 owner’s manual 3. Install the L-Pin: Insert the L-pin so it retains the spring arm at the L-bracket 4. Secure with Clip: Install the proper L-pin clip to hold the L-pin in place 5. Repeat on Opposite Side: Install and secure the second L-pin on the other side of the hitch setup if needed 6. Inspect Before Towing: Confirm both spring arms, L-brackets, L-pins, and clips are properly installed and secure before travel Always follow the Fastway e2 owner’s manual for your specific hitch model. Do not tow with missing, damaged, modified, or improperly secured weight distribution hitch hardware.
• (1) Fastway e2 L-Pin
Fastway Trailer Products / Progress Mfg.: Website: fastwaytrailer.com/contact-us Fastway is manufactured by Progress Mfg., the same company behind Fastway and Equal-i-zer towing products.