Custom-built 4-point hydraulic leveling system for any Class A Diesel motorhome. Bluetooth app-controlled. One-touch sequential Smart-Level operation. Patented sequential leveling process. Weld-on brackets. 18" stroke front and rear jacks.
The 8135A is a custom-built system with a lead time. EQ Systems requires that you call or email before placing an order. Fitment must also be verified for your specific Class A Diesel chassis before the system is built. Contact EQ Systems before ordering: Email: [email protected] Toll Free: 800-846-9659 Have your vehicle's year, make, model, floor plan, and chassis specifications ready. Hose lengths are included per the standard fitment guide — if your pump or jack placement differs from the standard guide, specify required hose lengths in your order notes or by calling EQ Systems before ordering.
The EQ Systems 8135A brings EQ's patented EQ Smart-Level technology to any Class A Diesel motorhome. This is the same hydraulic leveling system used by top RV manufacturers at the factory — now available as an aftermarket installation kit complete with all hardware, harnesses, hoses, and weld-on mounting brackets for the jack legs and hydraulic pump.
Where manual or basic automatic systems operate all jacks simultaneously and often result in an imprecise final level, EQ Smart-Level uses a patented sequential leveling process — each jack operates independently in sequence, working from the lowest point of the coach outward. This approach delivers a more precise level throughout the length of the vehicle while keeping the coach as low to the ground as possible during the process. The result is a more stable, more level coach with less effort and in less time — typically around two minutes from parking to fully leveled.
Control is handled through the EQ Smart Level app (iPhone, Android, and ASA Electronics iN-Command compatible) via built-in Bluetooth, or directly from the onboard Smart-Level controls. A field-adjustable null lets you calibrate the system to your preferred level position, and auto All Retract stows all four jacks simultaneously when you're ready to move.
Level from your smartphone via the EQ Smart Level app — iPhone, Android, and ASA Electronics iN-Command compatible
Each jack operates independently in sequence for precise leveling — more accurate than simultaneous systems, coach stays low during the process
Push once and the system handles the rest — audible and visual prompts keep you informed throughout the leveling process
Single-button retraction stows all four jacks simultaneously — fast, safe, and prevents accidentally driving away with jacks extended
Protect your driveway, pad, or campsite surface and keep your jacks from sinking into soft ground with SnapPad EQ-Octagon Jack Pads — 4-Pack (Part #70147). SnapPads permanently attach to the bottom of your jack feet and stay in place — no bending over to place and retrieve pads every time you level. The EQ-Octagon profile is designed for octagonal EQ jack feet. Sold as a 4-pack to cover all four jacks on this system.
The 8135A uses weld-on brackets to mount both the jack legs and hydraulic pump to the motorhome chassis. Installation requires welding capability and should be performed by a qualified RV service center or installer experienced with hydraulic leveling systems. Do not attempt to install this system without proper welding equipment and experience. Improper bracket installation can result in jack failure, chassis damage, or personal injury. Factory installation is available — contact EQ Systems at 800-846-9659 for factory installation scheduling.
This kit is built to the standard EQ Systems fitment guide and includes (4) 14' hoses and (4) 40' hoses. If your chassis configuration places the pump or jack legs in non-standard locations, the included hose lengths may not be correct for your installation. Pre-measure before ordering. If you need different hose lengths, include the required lengths in your order notes or call us at 1-866-332-7881 before placing your order.
To download: Open the App Store (iPhone) or Google Play (Android) and search "EQ Smart Level". Compatibility: iPhone, Android smartphones, and ASA Electronics iN-Command Control Systems. Important: Bluetooth must be enabled on your device before opening the app — if Bluetooth is off, the app will not connect to your coach's leveling system. The app provides one-touch level control, status monitoring during the leveling cycle, audible/visual completion alerts, and All Retract control from your smartphone.
Complete Kit Contents: • (2) 18" Stroke Front Jacks • (2) 18" Stroke Rear Jacks • Complete Pump with Manual Override • EQ Smart-Level Controls • All Wire Harnesses • (4) 14' Hydraulic Hoses • (4) 40' Hydraulic Hoses • Weld-On Mounting Brackets and Hardware (jack legs and pump) NOT Included: • Dexron ATF hydraulic fluid • SnapPad EQ-Octagon 4-Pack #70147 (recommended, sold separately)
EQ Systems offers separate Smart-Level kits for Class A Diesel and Class A Gas motorhomes. The systems share the same Smart-Level technology but differ in bracket configuration and chassis fit. Make sure you select the correct system for your chassis type.
⚠️ This is a custom-built system — contact EQ Systems before placing your order. Fitment must be verified and lead time confirmed for your specific chassis. EQ Systems Technical Support & Orders: Local: 574-264-3437 Toll Free: 800-846-9659 Email: [email protected] Hours: Monday–Friday, 7AM–4PM EST Hose Length Questions: If your installation requires hose lengths other than the standard (4) 14' and (4) 40' included in this kit, call us at 1-866-332-7881 or include your required lengths in your order notes before the order is submitted. Warranty Information: 1-Year Limited Manufacturer's Warranty. All warranty claims require prior written or verbal authorization from EQ Systems. Warranty covers defects in material and workmanship only. Retain proof of purchase and installation date for any warranty claims.