A direct-replacement brake hub for Lippert-equipped trailer axles rated at 6,000 lbs. Solid iron construction, pre-packed with bearing cones, seals, and grease -- ready to bolt on without a trip to a shop press. Fits 14.5-inch to 16.5-inch wheels with a standard 6 on 5.5-inch bolt circle.
The Lippert 814202 is engineered as an OEM-spec replacement for trailer axles rated at 6,000 lbs -- the axle weight rating common to single-axle travel trailers, fifth wheels, and utility trailers in the 10,000-14,000 lb GVWR range. The hub ships fully assembled with bearing cones, bearing cups, grease seals, and packed grease, so you can complete the swap roadside or in your driveway without specialized bearing-press equipment.
The solid iron drum provides the thermal mass and rigidity needed for consistent electric brake performance. Lippert rates the 814202 for 12-inch brake drum diameter, matching the standard 12-inch electric brake assemblies used on their 6K axle lines. The 1/2-inch lug studs are the industry-standard size for this class of trailer wheel.
Bearing cones, seals, and packed grease are included and installed at the factory -- no bench work required before mounting.
Cast iron hub provides the heat dissipation and structural rigidity required for reliable electric brake operation under load.
6 on 5.5-inch bolt circle (5.5-inch measured diameter across the bolt circle) matches the most common 6-lug trailer wheel standard in this weight class.
Accepts wheel sizes from 14.5 inches to 16.5 inches, covering the standard range used on tandem- and single-axle RV trailers.