Home > LP Gas > LP Hoses >

MB Sturgis 100019-15 POL x 1/4" Inverted Flare LP Pigtail Hose 15" | 350 PSI | UL569

MB Sturgis 100019-15 POL x 1/4" inverted flare LP pigtail hose 15" for dual cylinder RV propane systems
MB Sturgis Prest-O-Lite x 1/4" Inverted Flare - 15"
 
List Price: $21.19
: $15.49
You save $5.70!
Part Number: 100019-15
Manufacturer: MB Sturgis

Quantity in Stock :33

Availability: In Stock
Qty:

 
MB Sturgis 350 PSI Rated UL569 / ANSI Z21-81 Certified MB Sturgis 100019-15 -- POL x 1/4" Inverted Flare LP Pigtail Hose, 15"

This 15" propane pigtail hose connects a dual LP cylinder setup to a two-stage regulator using a POL (Prest-O-Lite) tank fitting on one end and a 1/4" male inverted flare on the other. Purpose-built for high-demand RV applications where a standard Type 1 connection restricts gas flow and causes regulator bypass issues.

Stop LP Bypass Problems Before They Start

When multiple RV appliances -- furnace, water heater, cooktop, and generator -- run simultaneously, the demand for propane can overwhelm a single-tank or Type 1 connection. The result is regulator bypass: raw, unregulated LP reaching your appliances at dangerously high pressure. The MB Sturgis 100019-15 pigtail is the correct hose to run in a dual-cylinder changeover or two-stage regulator setup, using a POL fitting that allows significantly higher gas flow than a Type 1 (QCC/ACME) connection.

The 15" length suits tight underbelly compartments and standard dual-bottle brackets common on travel trailers, fifth wheels, and Class A/C motorhomes. The 1/4" male inverted flare outlet threads directly into most two-stage automatic changeover regulators used in RV LP systems.

POL High-Flow Connection

Left-hand threaded POL fitting with built-in excess flow valve. Flows more LP than Type 1 -- critical for high-demand multi-appliance RV systems.

1/4" Male Inverted Flare Outlet

Standard 1/4" MIF fitting threads directly into two-stage and automatic changeover regulators without adapters in most applications.

350 PSI Max Pressure

Thermoplastic hose body rated to handle full tank pressure -- safe for liquid or vapor LP service at the cylinder connection point.

Certified and Compliant

UL569 listed and ANSI Z21-81 certified for LP gas service. Meets safety requirements for RV propane systems in the US and Canada.

What the POL Fitting Means for Your System

POL stands for Prest-O-Lite -- an older but still widely used LP cylinder valve standard. Unlike the Type 1 (QCC1/ACME) handwheel fitting common on portable grill tanks, the POL valve is a left-hand threaded male fitting that screws into the female POL valve on standard 20 lb and larger DOT cylinders. Permanently mounted RV LP tanks -- whether horizontal ASME tanks or vertical DOT cylinders in dual-tank brackets -- almost universally use POL or POL-compatible valves.

The POL connection is designed for higher-volume vapor withdrawal and includes an integral excess flow valve in this assembly, which automatically restricts gas if a downstream hose ruptures. This makes it the correct choice for pigtails feeding a two-stage regulator, where full tank pressure is present on the inlet side.

Excess Flow Protection Included: The POL end of this hose contains an integral excess flow valve. If a downstream hose or connection fails, gas flow is automatically restricted, reducing the risk of uncontrolled LP release.

Typical Installation: Dual-Cylinder Two-Stage Systems

Most RVs with dual LP cylinders use an automatic changeover regulator (two-stage) that switches from the primary to the reserve cylinder when the primary empties. Each cylinder connects to the regulator via a separate pigtail hose. The MB Sturgis 100019-15 is designed for exactly this role:

  • Thread the POL fitting (left-hand thread -- turn counterclockwise to tighten) into the cylinder valve. Use an open-end wrench -- do not use thread sealant on LP fittings.
  • Connect the 1/4" male inverted flare to the matching female inverted flare inlet on your two-stage or automatic changeover regulator.
  • Check for leaks with approved LP leak detector solution before lighting any appliances.
  • Replace both pigtail hoses at the same time to maintain consistent flow balance across both cylinders.
Not for Type 1 / QCC Cylinders: This hose uses a POL fitting, which is NOT compatible with newer 1-lb through 20-lb portable cylinders that have a Type 1 (QCC1/ACME handwheel) valve. Confirm your RV cylinder valves are POL-type before ordering.

Replacement and Inspection Intervals

LP hoses should be inspected at least once per season and replaced at the first sign of cracking, brittleness, abrasion, or kinking. Many LP safety guidelines recommend replacing propane hoses every 5-10 years regardless of visible condition. The 15" thermoplastic body of this hose is rated from -40F to 140F, covering full four-season use including cold-weather camping where other hose materials may stiffen and crack.

Maintenance Tips:
  • Inspect hose body for cracks, cuts, or abrasion each season.
  • Check POL and inverted flare fittings for corrosion or deformation before each season.
  • Use an LP-rated leak detector solution -- never use an open flame -- to test connections after installation.
  • Keep hose routed away from heat sources, sharp edges, and moving parts inside the LP compartment.

Product Identity

ManufacturerMB Sturgis
Manufacturer Part #100019-15
Vendor Part #06-1370
SKU69-6599
UPC764560529028

Hose Specifications

Hose Length15 inches
Hose Body MaterialThermoplastic (LP-rated)
Tank End FittingPOL (Prest-O-Lite), left-hand thread
Regulator End Fitting1/4" male inverted flare
Excess Flow ValveIntegral, POL end
Gas TypeLP (propane) only

Performance Ratings

Max Pressure350 PSI
Max Flow Rate500,000 SCFH
Temperature Range-40F to 140F (-40C to 60C)

Certifications and Compliance

UL ListingUL569
ANSI StandardANSI Z21-81
ServiceLP gas vapor/liquid withdrawal at cylinder

Physical and Warranty

Weight0.2 lbs
WarrantyLimited 1-Year Manufacturer Warranty

Compatibility and Fitment

Cylinder Valve TypePOL (standard on RV DOT and ASME LP tanks)
Regulator Inlet Type1/4" female inverted flare (standard on most two-stage and automatic changeover regulators)
Typical ApplicationDual-cylinder two-stage LP regulator systems on RVs
NOT Compatible WithType 1 (QCC1/ACME) cylinder valves
Important Information -- Read Before Installing
  • For LP (propane) gas service only. Not rated for natural gas, CNG, or any other fuel.
  • POL fitting uses LEFT-HAND thread -- turn counterclockwise to tighten. Forcing clockwise will damage the fitting and the cylinder valve.
  • Do not use thread sealant (pipe dope or PTFE tape) on LP flare or POL fittings. These are metal-to-metal sealing connections.
  • Always test for leaks with approved LP leak detection solution after installation. Never test with an open flame.
  • Turn off all appliances and close the cylinder valve before connecting or disconnecting this hose.
  • Maximum pressure is 350 PSI -- do not use with systems that exceed this rating.
  • Do not use if hose body is cracked, kinked, abraded, or shows any sign of damage.
  • This hose is for vapor withdrawal service at the LP cylinder. Installation must comply with NFPA 58 and applicable local codes.


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Hoses
LP Gas


$30.49
$389.00
$264.55