Home > Electrical > Generator Parts & Accessories >

Onan 0300-4946 Pigtail Remote Control Panel Harness

Onan 0300-4946 Pigtail Remote Control Panel Harness
Onan Pigtail Remote Control Panel Harness
 
List Price: $20.49
: $16.35
You save $4.14!
Part Number: 300-4946
Manufacturer: Cummins Onan

Quantity in Stock :15

Availability: In Stock
Qty:

 
Cummins Onan 0300-4946 Pigtail Remote Control Harness - QG LP & Gas Generators

Cummins Onan 0300-4946 Pigtail Remote Control Harness — QG LP & Gas Generators

9-pin adapter that mates with the sealed remote connector on Onan QG gasoline and LP generators. 6 inches of bare wire for custom wiring installations.

Generator-Side Adapter for Custom Remote Wiring

The Cummins Onan 0300-4946 is a short pigtail adapter that plugs directly into the sealed 9-pin remote control connector on compatible Onan QG gasoline and LP vapor generators. The other end provides 6 inches of bare, unterminated wire — giving the installer a connection point to splice into existing RV remote wiring, a custom control panel, or a third-party remote start system.

This is a different product from the 338-3489-01 (10') and 338-3489-02 (30') full harnesses, which run from the generator all the way to a standard Onan remote panel connector. The 0300-4946 is designed for situations where the RV already has wiring in place, or where a custom wiring solution is needed — the installer provides their own wire run and terminations beyond the 6-inch pigtail. It supersedes the earlier part number 338-3527.

🔌 9-Pin Sealed Connector

Mates directly with the sealed remote control connector on compatible Onan QG generators — secure, weatherproof connection at the generator end

âœ‚ī¸ 6" Bare Wire Leads

Unterminated wire ends allow the installer to splice into existing RV wiring, a custom panel, or a third-party remote start system without replacing the entire harness

🔄 Supersedes 338-3527

Current part number replacing the earlier 338-3527 — direct substitute for existing installations using the older part number

🔧 Custom Install Flexibility

Ideal for generator upgrades where the existing RV remote wiring is retained, or for installations requiring a non-standard panel or run length

â„šī¸ Pigtail vs. Full Harness — Which Do You Need?

0300-4946 (This Part) — Generator-side connector only, 6" bare wire leads. For custom wiring, existing RV harness retention, or third-party remote start integration. You supply the wire run and terminations.

338-3489-01 — Complete 10-foot plug-and-play harness from generator to Onan remote panel.

338-3489-02 — Complete 30-foot plug-and-play harness from generator to Onan remote panel.

If you are installing an Onan remote panel from scratch with no existing wiring, the 338-3489-01 or 338-3489-02 full harnesses are the simpler solution.

âš ī¸ Not Compatible with KV Spec A–E or KY Spec A–E

This pigtail requires the sealed remote connector found on later-spec generators. It is not compatible with MicroLite KV Spec A–E or MicroQuiet KY Spec A–E generators, which lack this connector. Confirm your generator's spec letter before ordering.

Technical Specifications

Part Number0300-4946 (also listed as 300-4946)
Supersedes338-3527
BrandCummins Onan
Part TypePigtail Remote Control Harness Adapter
Generator Connector9-pin sealed remote connector
Wire Length6 inches (bare, unterminated)
Fuel TypesGasoline and LP Vapor
CompatibilityKV (Spec F+), KY (Spec F+), KYD, HGJAA, HGJAB, HGJAC, HGJBB and other QG series with sealed remote connector
Weight1 lb
Warranty2-Year Limited Manufacturer's Warranty

📋 Warranty Information

Backed by a 2-year limited manufacturer's warranty against defects in materials and workmanship.



Browse for more RV Accessories in the same category as this item:

Electrical > Generator Parts & Accessories
Electrical


$361.49
$76.99