Home > Steps & Ladders > RV Entry Step Covers >

Lippert 08-6211 Wireless LED Motion Activated RV Step Light, IP65, Battery Operated, 6.75 in.

Lippert 08-6211 wireless LED motion activated RV step light with magnetic mount, IP65 rated, 6.75 x 1.75 inch amber LED bar
Lippert 2022172335 Wireless LED RV Motion Activated Step Light
 
Alternative Views:


Provides automatic, battery-powered illumination for safer, well-lit RV steps in low-light conditions.
List Price: $34.69
: $26.49
You save $8.20!
Part Number: 2022172335
Manufacturer: Lippert

Quantity in Stock :33

Availability: In Stock
Qty:

 
Lippert IP65 Weather-Resistant No-Wire Install Lippert 08-6211 Wireless LED Motion Activated RV Step Light

Stop fumbling for a flashlight every time you step in or out after dark. The Lippert 08-6211 snaps onto your RV steps with a strong magnet -- or mounts to aluminum and fiberglass with the included adhesive metal plate -- and turns on automatically the moment it detects movement. Two amber LEDs behind a diffusion panel cast a soft, glare-free glow right where your foot lands. No wiring, no drilling, no electrician required.

Safer Steps, Zero Wiring

Trips and falls on RV steps are one of the most common campsite injuries -- and they happen most often in low-light conditions. The Lippert 08-6211 puts reliable illumination exactly where it counts: on the step itself, activated the instant someone approaches, without drawing a single wire from your rig's 12V system.

The built-in photocell sensor keeps the light off during daylight hours, so battery power is reserved for when it actually matters. Once triggered by motion, the light stays on for 15 seconds -- long enough to safely make every step -- then shuts off automatically to extend battery life.

Magnetic Quick-Mount

Strong integrated magnets snap directly to the underside of steel RV steps. No tools, no hardware, no holes. Detach in seconds to use as a handheld flashlight.

Amber LED + Diffusion Panel

Two amber LEDs paired with a frosted diffusion panel produce a soft, wide-angle glow. Bright enough to see clearly, gentle enough not to blind you at 2 a.m.

Auto On/Off -- 15-Second Timer

PIR motion sensor activates the light when movement is detected and turns it off after 15 seconds automatically. Daylight sensor prevents unnecessary daytime activation.

IP65 Weather-Resistant

Sealed against dust ingress and low-pressure water jets. Rated for year-round outdoor exposure including rain, road spray, and campsite humidity.

Mounts on Nearly Any Surface

Most RV entry steps are steel -- the magnet holds instantly with no prep work. For aluminum steps, composite skirting, fiberglass bays, or any non-magnetic surface, Lippert includes an adhesive-backed metal plate that bonds to the surface and gives the magnet a secure grip. No drilling, no screws, and no permanent modification to your rig.

The removable design also means this light doubles as a portable flashlight. Pull it off the step to check a tire, inspect a hookup connection, or navigate a dark campsite loop. Then snap it back into place before you turn in for the night.

Doubles as a Portable Flashlight -- Detach the 08-6211 from its mount in one motion and use it handheld anywhere on the campsite. The magnet stays strong through thousands of attach/detach cycles.

Battery Life and Power

The 08-6211 runs on 6 AA batteries (not included). Lippert rates the battery lifecycle at approximately 43 hours of cumulative on-time. Because the light only activates at night and only when motion is detected -- typically 15-second bursts -- real-world battery life in typical RV use will span many camping trips before a change is needed. Stock a spare set of AAs in your rig and you'll rarely be caught short.

Battery Tip: Alkaline AAs deliver the most consistent output across temperature ranges. Lithium AAs extend life further in cold-weather camping (below 32 deg F) where alkalines lose capacity quickly.

Durable Construction for Outdoor Use

The housing is heavy-duty injection-molded plastic designed to handle UV exposure, road vibration, and weather without cracking or fading. The IP65 rating confirms it is fully dust-tight and protected against water jets from any direction -- so a rainstorm or a quick rinse during campsite cleanup won't affect performance.

Heads Up: Batteries (6 x AA) are NOT included. The adhesive metal plate requires a clean, dry, grease-free surface for a secure bond -- wipe the mounting area with isopropyl alcohol and allow to fully dry before pressing the plate into place. Allow 24 hours cure time before heavy use.

Common Uses Beyond the Entry Step

  • Under slide-out steps or folding step assemblies
  • Inside storage bays for hands-free bay lighting
  • On the tongue of a trailer for hitching in the dark
  • Along the underside of a fifth wheel pin box area
  • Inside a tow vehicle or truck bed toolbox (magnetic mount works on steel bed walls)
  • As a portable utility light clipped to a metal awning arm
Maintenance Note: Wipe the lens and sensor window periodically with a damp cloth. Road grime on the PIR sensor window can reduce detection range. Check battery contacts for corrosion if the unit has been stored for an extended period.

Part Identification

ManufacturerLippert
Part Number08-6211
UPC848150053138

Physical Specifications

Length6.75 in.
Width1.75 in.
Height1.75 in.
Weight0.5 lbs.
Housing MaterialHeavy-duty injection-molded plastic

Electrical and Lighting

Power SourceBattery (6 x AA, not included)
Light TypeAmber LED
Number of LEDs2
Lens TypeFrosted diffusion panel
Battery LifecycleApprox. 43 hours cumulative on-time
Wiring RequiredNone -- fully wireless

Sensor and Operation

ActivationPIR motion sensor
On Duration15 seconds per trigger
Daylight ShutoffYes -- built-in photocell sensor
Mount TypeIntegrated magnet (primary)
Alternate MountAdhesive-backed metal plate (included)

Ratings and Certifications

Weather RatingIP65 (dust-tight, water jet resistant)
UV ResistanceYes -- UV-stabilized housing
Warranty1-Year Limited Manufacturer Warranty

In the Box

Step Light1x Lippert 08-6211 LED Motion Light
Mounting Plate1x Adhesive-backed metal plate
BatteriesNOT included (requires 6 x AA)
Important Information
  • 6 AA batteries are required for operation and are NOT included with the light.
  • The adhesive metal plate must be applied to a clean, dry, degreased surface. Allow 24 hours bond cure time before subjecting the mount to vibration or load.
  • IP65 rating protects against water jets and dust but does NOT mean the unit is fully submersible. Do not submerge or pressure-wash directly at close range.
  • The built-in daylight sensor will suppress activation in bright conditions -- if the unit does not trigger during testing, verify the sensor window is not obstructed and that you are testing in low-light conditions.
  • This light is not connected to the RV's electrical system and will not drain your chassis or house batteries.
  • Mounting magnet is strong -- keep away from magnetic media, credit cards with magnetic strips, and pacemaker devices during handling.


Brighten Your RV Steps for Safer, Worry-Free Entry
Navigating your RV steps in the dark can be risky, with obstacles like camping gear, furniture, or stray toys creating potential hazards. The Lippert Motion-Activated RV Step Light enhances safety by automatically lighting up your steps with a soft amber glow, ensuring clear visibility without disturbing your neighbors. This versatile light isn't just for steps—it’s perfect for illuminating storage compartments, interior spaces, or any dim area around your RV. Built with heavy-duty injection-molded plastic and rated IP65 for weather resistance, it’s designed to withstand harsh outdoor conditions, making it an essential addition to your RV lifestyle.

Effortless Installation with Versatile Mounting Options
Designed for convenience, this motion-sensing RV step light features powerful built-in magnets that securely attach to a variety of RV steps, including Lippert Solid Step®, Kwikee®, Tread Lite®, and Alumi-Tread® models, as well as many competitor brands. Need a portable flashlight? Simply detach it from your steps and use it to navigate your campsite or make a late-night restroom trip. For RVs without magnetic surfaces, the included adhesive-backed metal plate ensures easy, tool-free installation on any surface.

Smart Motion & Light Sensing Technology
Engineered for efficiency, this RV step light activates only when needed. When switched on, the built-in light sensor prevents activation in daylight, preserving battery life. After dark, the motion sensor detects movement and triggers illumination for 15 seconds, providing hands-free lighting whenever you approach. If no further movement is detected, the light automatically turns off, ensuring energy-efficient operation. The simple ON/OFF switch allows for manual control, so you can choose when and where you need extra visibility.

Durable, Weather-Resistant Design for Outdoor Adventures
Crafted for the rugged outdoors, this RV step light is built to handle the elements. With an IP65 weatherproof rating, it stands up to rain, dust, and extreme conditions, ensuring reliable performance season after season. Whether you're setting up camp, hitting the road, or simply enhancing nighttime safety, this durable light delivers long-lasting, dependable illumination for your RV experience.


Browse for more RV Accessories in the same category as this item:

Steps & Ladders > RV Entry Step Covers
RV Lighting > Outdoor Lights
RV Lighting
Steps & Ladders


$30.49
$1.83
$77.99