Designed exclusively for pickup truck campers stored off the truck, the Classic Accessories PolyPRO3 Model 1 cover shields your investment from UV, dirt, moisture, and weather with a fitted, ventilated design that reduces wind stress and prevents interior condensation buildup during long-term storage.
The PolyPRO3 cover uses a three-ply fabric system -- a polypropylene face, a reinforced middle layer, and a soft interior -- to balance weather resistance with breathability. The quick-drying PolyPRO side panels work alongside an integrated air vent system to allow trapped moisture and condensation to escape, a critical feature for campers stored for extended periods.
Unlike universal tarps, this cover is sized specifically for 8 to 10 ft truck campers. Adjustable tension panels front and rear plus elasticized hem corners pull the cover snug against the camper body, eliminating the billowing and abrasion that shortens the life of generic covers.
Air vents combined with quick-drying PolyPRO side panels reduce wind load and allow interior moisture to escape during storage.
Strategically placed zipper panels let you open camper doors and access entry points without removing the entire cover.
Adjustable front and rear tension panels plus elasticized hem corners provide a fitted, secure profile across the full 8-10 ft size range.
Integrated rope attachment system and an included toss bag make installation easier and reduce the need to crawl under the camper.
The PolyPRO3 designation refers to the three-layer construction: a woven polypropylene outer face that sheds water and resists UV degradation, a reinforcing inner scrim for tear resistance, and a soft non-scratch interior that protects painted and gel-coat surfaces. The polypropylene face dries quickly after rain, preventing the sustained dampness that promotes mold and mildew under the cover.
One of the most practical features on the PolyPRO3 is the ability to access your camper doors through zippered panels without pulling the cover off entirely. This matters when you need to retrieve gear, check systems, or do light maintenance during the off-season without a full uncovering and re-covering cycle each time.
Classic Accessories integrates a rope attachment system around the cover hem. Combined with the included toss bag, you can run the securing rope under the camper and back up the other side without lying on the ground. For a camper stored on jack stands or a support frame, this makes solo installation manageable.
If you pull your camper off the truck at the end of a season and store it in a yard, on a pad, or under a structure with open sides, the PolyPRO3 Model 1 gives you a dedicated, properly sized cover that is far better than a tarp and easier to manage than a custom-sewn enclosure. It works equally well for weekend warriors putting the camper away between trips and full-season storage in climates with UV, rain, snow load (light), and dust exposure.