A straightforward, safety-rated propane hose designed for everyday use between 20 or 30 lb refillable cylinders and the regulator inlet on your camper or RV. Built-in thermal protection and excess flow protection give you a critical layer of safety that bare hoses simply don't provide.
The Camco 59843 is a 20-inch LP hose purpose-built for connecting standard 20 lb or 30 lb DOT propane cylinders to a single-stage or two-stage regulator on a camper, travel trailer, pop-up, or portable propane appliance setup. At 20 inches, it gives you enough slack to comfortably seat the tank without pulling on your regulator fitting.
The Type 1 ACME nut on the tank end threads onto the standard OPD valve found on all refillable cylinders manufactured after 1998 in the US and Canada. The 1/4-inch Male NPT on the regulator end is compatible with the vast majority of RV regulator inlets and most portable appliance adapters.
Internal thermal shutoff responds to fire or extreme heat conditions, cutting off propane flow automatically to limit risk.
If the downstream gas line is broken or disconnected unexpectedly, the excess flow valve restricts flow to reduce hazard.
Fits all standard OPD-equipped 20 lb and 30 lb refillable propane cylinders sold in the US and Canada since 1998.
Threads directly into most RV regulator inlets and compatible appliance adapters without additional fittings.
Bare braided LP hoses without thermal or excess flow protection are legal in some installations but leave you exposed in two scenarios: a campfire or heat source that compromises the hose before you can shut off the tank, and a fitting failure or severed hose that allows uncontrolled propane release. Camco engineered both protections into this hose so you don't have to source them separately or rely on your regulator alone.
Camco backs this hose with a limited 90-day warranty against defects in materials and workmanship. The hose is manufactured to meet applicable LP gas hose standards for recreational vehicle and portable appliance use.