Complete PTO-ready 8-roller cast iron pump kit with torque arm, chain, and multi-speed coupler included. 24.5 GPM, 150 PSI, counter-clockwise rotation, 15/16" shaft.
The Remco R880C-TAK takes the maximum-output performance of the R880C and packages it with everything needed for a complete, ready-to-mount PTO installation. The kit includes the R880C cast iron roller pump, the RMTAC Torque Bar and Chain for rotation prevention, and the RMC151651 multi-speed coupler — giving operators a fully outfitted heavy-duty sprayer pump setup right out of the box with no need to source accessories separately.
Delivering up to 24.5 GPM through its 8-roller cast iron design, the R880C-TAK is built for the largest and most demanding PTO agricultural sprayer applications. And like every pump in the RollMax family, it's engineered around Remco's Rebuild Ready platform — fully serviceable in the field in minutes with nothing more than a wrench, without touching the drive shaft or plumbing connections.
Pump, torque arm, chain, and multi-speed coupler all included — no separate accessory purchases needed
The highest-output RollMax model — 8-roller design delivers maximum volume for large-scale PTO sprayer operations
Full field serviceability in minutes with only a wrench — shaft and plumbing stay connected throughout
Rugged cast iron body paired with a 15/16" shaft and 1" FNPT ports for maximum-volume PTO sprayer rigs
• R880C — 8-Roller Cast Iron RollMax Pump, CCW Rotation, 15/16" Shaft, 1" FNPT Ports • RMTAC — Torque Bar and Chain for rotation prevention on PTO-mounted installations • RMC151651 — 15/16" Shaft, 540/1000 RPM Multi-Speed Coupler, Cast Aluminum/Zinc, Set Screws The R880RK Universal Repair Kit is sold separately and recommended to keep on hand for field rebuilds.
The R880C-TAK pump stays mounted to the drive shaft and plumbing throughout the entire rebuild process. All you need is a wrench: Step 1: Loosen and remove the 4 cap bolts Step 2: Slide the pump's endplate off the shaft carefully Step 3: Inspect and replace worn rollers using the R880RK repair kit; lubricate shaft seal before reinstalling Step 4: Reinstall the endplate and cap bolts Step 5: RollMax is ready to spray The R880RK Universal Repair Kit is sold separately — recommended to keep on hand for fast, no-downtime field rebuilds.
Repair Kit (sold separately): • R880RK — Universal Repair Kit: 8 Max Rollers (3/4"), Needle Bearing, 2 Lip Seals, O-Ring, Pill Key
📥 Download the RollMax Operation Manual (PDF) The manual covers installation, operation, maintenance, and rebuild procedures for the full RollMax pump series including the R880C-TAK. Technical Support: Remco Industries Website: remcoindustries.com
The R880C-TAK is configured for Counter-Clockwise (CCW) rotation only. Confirm your PTO drive shaft rotation direction before installation. Running the pump in the wrong direction will result in poor performance and accelerated wear. The included RMTAC Torque Bar and Chain should be installed to prevent pump rotation during PTO operation.