Keep your RV's propane tanks protected from the sun, rain, road grime, and UV degradation. The Icon Direct 06-0110 is a purpose-built, deluxe-grade cover sized specifically for side-by-side dual 20 lb or dual 30 lb LPG cylinders -- the standard configuration on most travel trailers and fifth wheels. A hinged front door gives you quick access to the on/off valves and regulator without removing the cover.
Exposed propane tanks suffer more than just cosmetic damage. UV radiation degrades the steel cylinder coatings, oxidizes regulator components, and degrades rubber hose fittings over time. The Icon 06-0110 is molded from high molecular weight, UV-inhibited polyethylene -- the same material class used in premium outdoor furniture and marine applications -- so it holds its color and structural integrity even after years in the sun.
At 31 inches wide x 13 inches deep x 25 inches tall, this cover accommodates standard dual-tank configurations without forcing your tanks into an awkward arrangement. The Polar White finish blends cleanly with most RV exterior color schemes and reflects solar heat rather than absorbing it.
High molecular weight polyethylene with built-in UV inhibitors resists fading, cracking, and chalking through years of outdoor exposure.
Front door swings open for direct access to the regulator and on/off valve handles -- no need to lift or remove the cover to light or shut off your propane.
Sized for side-by-side dual 20 lb or dual 30 lb cylinders -- the standard setup on most travel trailers and fifth-wheel RVs.
Backed by Icon Direct's limited 1-year manufacturer warranty against defects in materials and workmanship.
Most RV propane setups mount the tanks on the tongue or A-frame -- directly exposed to highway debris, weather, and constant UV. Over a typical camping season, unprotected tanks accumulate rust, dirt, and fading that shortens regulator life and makes routine checks harder. A well-fitted polyethylene cover like the 06-0110 creates a physical barrier against all of these, and its hinged door means you are not sacrificing convenience for protection.
This cover is designed for dual side-by-side 20 lb or 30 lb DOT cylinders. These are the standard horizontal-collar tanks used on the vast majority of travel trailers and fifth wheels sold in North America. It is not sized for single tanks, larger 40 lb cylinders, or vertical Manchester composite cylinders.
Verify your available mounting space before ordering: the cover requires 31 inches of width, 13 inches of depth, and 25 inches of vertical clearance in your tongue box or on your A-frame bracket.
The Icon 06-0110 is a drop-over shell style cover. It does not require drilling or permanent hardware for basic use. Many RV owners use nylon straps or bungee tie-downs through the base lip to secure it in transit -- especially important at highway speeds where wind lift can be a factor.