Voyager WVSXM70 7" WiSight 2.0 Wireless Monitor

The Voyager WVSXM70 is a 7-inch WiSight 2.0 digital wireless monitor designed for RV backup and full-time observation systems. It auto-pairs to WiSight 2.0 cameras like the WVSXC150, supports up to four cameras, and offers single/split/quad views with a bright TFT display, built-in speaker, detachable sunshade, and 12V DC power. Ideal for travel trailers, fifth wheels, motorhomes, and utility trailers that need a reliable, low-latency wireless video link.

Dimensions & weight

• Overall (monitor w/ sunshade, approx.): 7.4" W × 5.0" H × 1.3" D
• Screen diagonal: 7.0"
• Weight (monitor only, approx.): ~1.0 lb
• Operating voltage: 12V DC (10–30V tolerant on many installs)

What it does

• Auto-pairing: Pairs to WiSight 2.0 cameras at the push of a button—no menus or codes.
• Multi-camera layouts: Cycle single view, two-way split, three-way split, or quad to watch hitch, rear, and blind-sides.
• Clear daylight view: Anti-glare 7" LCD with detachable sunshade for bright conditions.
• Audio from camera: Built-in speaker lets you hear a spotter through a camera’s microphone.
• Trigger inputs (if equipped): Auto-switch on reverse/turn signals when wired that way.

Technical details

• Wireless protocol: WiSight 2.0 digital (low-latency, interference-resistant)
• Pairing: On-monitor PAIR button (hold ~5s), then power the camera to link
• Views: Single / split (various) / quad; per-camera naming & channel assignment
• Audio path: Camera mic → monitor speaker (per selected channel)
• Controls: Front panel buttons for view, pairing, brightness/contrast, volume
• Mounting: Dash/stand mount (included) or RAM-style mount (optional)
• Operating temp: -4°F to 149°F (-20°C to 65°C) typical for RV electronics
• Power: 12V DC from cig/acc plug; optional hardwire lead for clean installs
• Compliance: FCC/IC for wireless; RoHS-style materials compliance

Compatibility

• Camera systems: WiSight 2.0 only. Not backward-compatible with first-gen WiSight.
• Recommended cameras: Voyager WVSXC150 (rear/observation), WVSXC160/side cams (if offered).
• Vehicles: Motorhomes, fifth wheels, travel trailers, cargo/utility trailers, toterhomes.
• Power source: 12V accessory socket for quick setup, or hardwire for permanent installs.

What’s in the box

• WVSXM70 7" WiSight 2.0 monitor
• Detachable sunshade
• Adjustable dash/stand mount & hardware
• 12V cig/acc power cord (fused)
• Documentation

Install & pairing tips

1. Place the stand on a flat dash area; test view angles before final mounting.
2. Power the monitor from the included 12V plug or a switched 12V hardwire for a cleaner look.
3. Hold PAIR on the monitor (~5 sec), then apply power to the camera to auto-link.
4. Assign channels/names for each camera and choose your preferred split/quad layout.

Warranty & support

• Limited 1-Year Manufacturer Warranty
• RVupgrades support by phone, chat, email, and text

Recommended add-ons

• Voyager WVSXC150 WiSight 2.0 Wireless Camera (rear/observation, IP69K, mic)
• Extra camera(s) for side-view or hitch view (WiSight 2.0 series)
• 12V hardwire kit / add-a-circuit for permanent installs
• RAM-style arm/mount if you want more adjustability