Home > LP Gas > LP Hoses >

MB Sturgis 06-1381 High-Pressure Propane Hose 3/8" Female Flare Swivel x 3/8" MPT 72" - 350 PSI Rated, UL/CGA Certified

MB Sturgis 06-1381 high-pressure propane hose 72 inch with 3/8 inch female flare swivel and 3/8 inch MPT fittings, 350 PSI rated, UL/CGA certified
MB Sturgis High-Pressure Propane Hose - 3/8" Female Flare Swivel x 3/8" MPT - 72"
 
List Price: $26.06
: $18.99
You save $7.07!
Part Number: 100040-72-MBS
Manufacturer: MB Sturgis

Quantity in Stock :

Availability: Out of Stock
No Longer Available

 
MB Sturgis350 PSI RatedUL/CGA CertifiedMB Sturgis 06-1381 High-Pressure Propane Hose -- 72", 3/8" Female Flare Swivel x 3/8" MPT

A 6-foot high-pressure propane hose built for RV and outdoor appliance connections that demand reliability. The 06-1381 uses a 3/8" female flare swivel inlet and a 3/8" male pipe thread (MPT) outlet, handles up to 350 PSI, and is rated for temperatures from -40 F to 140 F. UL-listed and CGA-certified. Made in the USA with a limited 1-year manufacturer warranty.

Run Propane Safely to High-Pressure Appliances

The MB Sturgis 06-1381 is designed for high-pressure propane applications -- think outdoor grills, fryers, burners, generators, and other appliances that connect downstream of a high-pressure regulator rather than at low-pressure RV system pressure. At 72 inches (6 feet), this hose gives you enough reach to position appliances without straining fittings or creating sharp bends at the connection point.

The 3/8" female flare swivel end connects to standard POL or high-pressure regulator outlets equipped with a 3/8" male flare fitting. The swivel design eliminates twisting stress during installation and allows the hose to hang naturally under load. The 3/8" MPT (male pipe thread) outlet threads directly into appliance inlets, quick-connect bodies, or manifold ports that accept a standard 3/8" female NPT fitting.

350 PSI Max Pressure

Rated well above typical high-pressure regulator output, providing a safe working margin for demanding propane applications.

Full 72" Length

Six feet of hose allows practical appliance placement and routing without pulling fittings tight or kinking near the source.

Swivel Inlet Fitting

The 3/8" female flare swivel prevents hose twist during connection, reducing stress on both the hose and the regulator outlet.

UL Listed and CGA Certified

Third-party certified to UL and CGA standards -- required for many campgrounds, events, and commercial kitchen setups.

Made in the USA

MB Sturgis manufactures this hose domestically to meet UL and CGA certification standards. Quality control is consistent across the product line, and the hose carries a limited 1-year manufacturer warranty.

Typical High-Pressure Appliance Uses
  • Outdoor high-BTU burners and wok burners
  • Propane-powered generators with 3/8" MPT inlets
  • Camp grills and fryers running above low-pressure RV system output
  • Propane manifolds and quick-connect bodies with 3/8" female NPT ports
  • Secondary appliance taps from a high-pressure regulator on an RV
High-Pressure vs. Low-Pressure Systems

This hose is designed for use in HIGH-PRESSURE propane circuits -- between a propane cylinder and a high-pressure regulator outlet, or downstream of a high-pressure regulator feeding appliances rated for unregulated or high-pressure input. It is NOT a replacement for low-pressure (11" WC) RV appliance hoses used inside the coach. Verify your appliance inlet pressure requirement before connecting.

Installation and Care Tips
  • Apply soapy water or approved leak-detection solution to all connections after hookup and before lighting any appliance.
  • Never use Teflon tape on flare fittings -- flare connections seal metal-to-metal; tape can prevent a proper seal.
  • Route the hose away from heat sources, sharp edges, and areas where it could be pinched or driven over.
  • Inspect the hose before each use for cracks, abrasion, or stiff spots. Replace at the first sign of deterioration.
  • Store coiled loosely in a cool, dry location when not in use.

Specifications

ManufacturerMB Sturgis
Part Number06-1381
UPC764560528458
Country of OriginMade in USA
WarrantyLimited 1-Year Manufacturer Warranty

Hose Dimensions

Hose Length72 inches (6 feet)
Hose Inner Diameter3/8 inch ID
Weight1.08 lbs

Pressure and Temperature Ratings

Maximum Working Pressure350 PSI
Temperature Range-40 F to 140 F

Fittings

Inlet (Source End)3/8" Female Flare Swivel
Outlet (Appliance End)3/8" MPT (Male Pipe Thread)
Swivel DesignYes -- prevents hose twist on connection

Certifications

UL ListedYes
CGA CertifiedYes
Important Information
  • This is a HIGH-PRESSURE propane hose. Do not use in low-pressure (11" WC) RV appliance circuits inside the coach.
  • Maximum rated pressure is 350 PSI. Never exceed this rating.
  • Temperature range is -40 F to 140 F. Exposure outside this range can degrade hose integrity.
  • Do not use Teflon tape on the female flare swivel end -- flare connections are metal-to-metal seals.
  • Inspect for damage, cracks, or abrasion before every use. A damaged propane hose is a fire and explosion hazard.
  • Always leak-test all connections with an approved solution before operating any appliance.
  • Keep hose away from open flames, hot surfaces, and sharp edges during use and storage.


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Hoses
LP Gas