Home > LP Gas > LP Hoses >

MB Sturgis 06-1426 Sturgi-Stay Propane Adapter Kit -- POL Fitting + 5 ft Fill Hose, 250 PSI

MB Sturgis 06-1426 Sturgi-Stay Propane Adapter Kit with POL tank fitting and 5-foot LP fill hose assembly, 250 PSI rated for motorhome auxiliary cylinder use
MB Sturgis 103609-MBS Sturgi-Stay Propane Adapter Kit
 
Alternative Views:


List Price: $75.19
: $55.49
You save $19.70!
Part Number: 103609-MBS
Manufacturer: MB Sturgis

Quantity in Stock :25

Availability: In Stock
Qty:

 
MB Sturgis 250 PSI Rated UL / CSA Listed Components Sturgi-Stay Propane Adapter Kit -- Connect to an Auxiliary LP Cylinder Without Moving Your Coach

The MB Sturgis Sturgi-Stay kit is purpose-built for motorhome owners who spend extended time in one location and need LP gas without repositioning a 50,000-pound rig. Hook your coach's existing propane system to a standard auxiliary cylinder, and keep the slideouts out, the levelers down, and the awning open.

Stay Put. Stay Supplied.

Moving a motorhome every time the built-in tanks run low is disruptive, time-consuming, and hard on leveling systems. The Sturgi-Stay adapter kit solves that problem cleanly. It bridges your coach's LP inlet to a portable or installed auxiliary cylinder using a matched fitting and a 5-foot fill hose -- all with connectors and hose assemblies that meet UL and CSA LP gas standards.

The kit ships with two components: a multi-port Sturgi-Stay fitting and a ready-to-use POL x 1/4" inverted flare fill hose. No cutting, crimping, or sourcing additional fittings required for most installations.

No-Move Refill

Connect an auxiliary LP cylinder and refill or supplement your propane supply without repositioning the motorhome.

Excess Flow Protection

The POL tank connection on the fill hose includes an excess flow device for added safety during connection and use.

Wide Temperature Tolerance

Rated from -40 F to 350 F, so the hose and fittings stay flexible and sealed in cold-weather camping or hot summer conditions.

High-Pressure Rated

250 PSI maximum pressure rating provides a safe, reliable margin well above typical LP cylinder working pressures.

What Is Included

  • (1) Sturgi-Stay fitting -- POL tank connector x 1/4" female inverted flare inlet x #600 (1"-20) bulk propane adapter x female POL outlet
  • (1) 5-foot fill hose -- 1/4" ID thermoplastic hose assembly with POL tank connection (with excess flow) and 1/4" male inverted flare end
Complete Kit -- No Extra Fittings Needed: Both pieces are matched and ready to use together. The fill hose mates directly to the Sturgi-Stay fitting's 1/4" inverted flare inlet, and the fitting's female POL outlet connects to the coach's existing LP line.

Compatible MB Sturgis Part Numbers

This kit is compatible with and designed to work alongside the following MB Sturgis components:

  • MB Sturgis 100284
  • MB Sturgis 100575
  • MB Sturgis 100699
  • MB Sturgis 100019
Thread and Fitting Reference: The Sturgi-Stay fitting uses a standard POL (left-hand thread) tank connection on the inlet side and a #600 (1"-20 UNF) bulk propane port, consistent with common U.S. LP cylinder valves. The 1/4" inverted flare connections are the standard for RV LP tubing.

Typical Use Scenario

Seasonal campers, snowbirds, and work campers who set up for weeks or months at a time benefit most from this kit. Instead of breaking down camp to find a propane fill station or paying for delivery, connect a standard 20 lb or 30 lb cylinder as a supplemental source while the coach tanks are topped off later at convenience.

LP Gas Use Only: This kit is rated and approved for LP (liquefied petroleum) gas only. Do not use with natural gas, compressed air, or any non-LP application. Always connect and disconnect with the cylinder valve closed.

About MB Sturgis

MB Sturgis (based in Sturgis, Michigan) is a dedicated LP gas fittings and accessories manufacturer. Their components are sold under multiple brands in the RV and LP distribution industry and are manufactured to meet UL and CSA gas appliance standards. The Sturgi-Stay product line is one of their signature RV-specific solutions.

Maintenance Tip: Inspect the hose and fittings before each camping season. Look for cracks, abrasion, or stiffness in the thermoplastic hose and check that POL connections thread smoothly without cross-threading. Replace the hose assembly if any damage is found -- LP gas leaks are a serious safety hazard.

Kit Specifications

ManufacturerMB Sturgis
Vendor Part Number06-1426
SKU69-6648
UPC764560529325
Overall Hose Length60 inches (5 feet)
Max Pressure Rating250 PSI
Temperature Range-40 F to 350 F (-40 C to 177 C)
Weight3 lbs
Gas TypeLP (liquefied petroleum) gas only
WarrantyLimited 1-Year Manufacturer Warranty
CertificationsUL and/or CSA LP gas standards (per component)

Fitting Specifications

Fitting TypeSturgi-Stay multi-port adapter
Tank Connection (inlet)POL (left-hand thread, standard LP tank valve)
Hose Inlet Port1/4" female inverted flare
Bulk Propane Port#600 (1"-20 UNF) bulk propane adapter
Coach LP Line PortFemale POL outlet

Fill Hose Specifications

Hose ID1/4 inch
Hose MaterialThermoplastic
Tank End ConnectionPOL with excess flow device
Fitting End Connection1/4" male inverted flare
Length5 feet (60 inches)

Compatible Components

MB Sturgis 100284Compatible
MB Sturgis 100575Compatible
MB Sturgis 100699Compatible
MB Sturgis 100019Compatible

What Is in the Box

Sturgi-Stay Fitting1 included
5 ft POL x 1/4" Inverted Flare Fill Hose1 included
Auxiliary CylinderNOT included
RegulatorNOT included -- use coach's existing LP regulator
Important Safety Information
  • For LP (liquefied petroleum) gas use ONLY. Not compatible with natural gas, compressed air, or other gases.
  • Always close the auxiliary cylinder valve before connecting or disconnecting any fitting.
  • Inspect all connections for leaks using an approved leak-detection solution after every setup. Never use an open flame to check for leaks.
  • Do not exceed 250 PSI working pressure.
  • Do not use if the hose shows cracks, cuts, abrasion, kinking, or any visible damage. Replace immediately.
  • Keep the hose clear of heat sources, sharp edges, and moving parts when routing from the cylinder to the coach fitting.
  • This kit does not replace or bypass the coach's existing LP regulator. The coach regulator must remain in the system.
  • Installation and use must comply with NFPA 58 (Liquefied Petroleum Gas Code) and all applicable local codes.


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Hoses
LP Gas > LP Adapters
LP Gas