EPDM rubber slide-out seal with rigid C-channel. 7/8" H x 1" W — 30 ft roll. Black. Commonly found on Forest River, Heartland, Keystone and more.
The Steele Rubber Products 90-3383-265 Slide-On Bulb Seal With Channel is a 7/8" RV-grade weatherstrip engineered to keep moisture, wind, insects, and road debris out of your coach when your slide-out is fully retracted. Made from premium EPDM rubber, it resists UV fading, temperature extremes, shrinkage, and cracking — delivering long-lasting performance season after season.
The rigid "C" channel slides directly into a track channel or onto a wiper seal with a track, making installation straightforward without adhesive or special tools. This 7/8" profile is one of the most widely used slide-out seal sizes in the RV industry, commonly found across Forest River campers including the Sierra fifth wheel, Evergreen Bayhill fifth wheels, and many other major manufacturers. The 30-foot roll is well-suited for a single full-perimeter slide-out replacement or two-side repairs without the excess of a full 60-foot roll.
Blocks moisture, wind, insects, and road debris when your slide-out is fully closed
Commonly found on Forest River, Evergreen, Heartland, Keystone, Jayco, Lance, Tiffin and more
Rigid C-channel slides onto a track channel or wiper seal with track — no adhesive required
Will not fade, shrink, or crack. Engineered to withstand UV exposure and temperature extremes
This seal is known to fit a wide range of RV models from Forest River (including the Sierra fifth wheel), Evergreen (including the Bayhill fifth wheel), Heartland, Keystone, Jayco, Lance, Tiffin, ATC, Brinkley, Cruiser RV, East to West, Entegra, Nexus, Prime Time, and Renegade — but compatibility is not guaranteed for all years and configurations. This is not an exhaustive list and there may be other RV models this part fits. Always measure your existing seal and confirm it matches 7/8" H x 1" W before ordering. Confirm your slide-out uses a track channel or wiper seal with track, as this C-channel seal requires that style of receiver for proper installation.
Primary Part Number: 90-3382-265 Steele Rubber Base Part: 70-3833-265 Available Lengths (Same Profile): • 15 ft — Part 90-3382-265 (This item) • 30 ft — Part 90-3383-265 • 60 ft — Part 90-3384-265 Note: For the compatible track channel, see part 70-4120-265. For a compatible wiper with track, see parts 70-3884-265 (Small), 70-3883-265 (Medium), or 70-3835-265 (Large). For a larger profile, compare to the 1-3/16" Bulb Seal With Channel series (parts 90-3385-265, 90-3386-265, 90-3387-265).
What You Need: A compatible track channel (70-4120-265) or wiper seal with track already mounted on your slide-out. This seal does not use adhesive — the rigid C-channel slides directly into the receiver. Basic Installation Steps: 1. Measure & Cut: Measure the full perimeter of your slide-out opening and cut the seal to the required length using a sharp utility knife or scissors 2. Clean the Track: Remove the old seal and clean the track channel to remove dirt, debris, and old rubber residue 3. Slide Into Place: Starting at a corner, press the C-channel base of the seal into the track and work around the perimeter, ensuring the channel seats fully 4. Trim to Fit: Cut any excess at the end point for a clean, flush joint 5. Test the Slide: Extend and retract the slide-out to confirm the seal compresses evenly and does not bind
Included: • One (1) 90-3382-265 Slide-On Bulb Seal With Channel • 30-foot pre-cut length • EPDM black rubber construction NOT Included — May Be Needed: • Track channel (see part 70-4120-265) • Wiper seal with track (see parts 70-3884-265, 70-3883-265, or 70-3835-265) • Installation tools (utility knife, tape measure)
Always measure your existing seal and compare dimensions before ordering. Compatibility is based on known fitment and may vary by individual RV model, production year, and manufacturing variations. This is not an exhaustive fitment list.