 |
Additional Product Information
How to Use:
1. Close valve to the water pump, or if there is no valve, be sure your fresh water tank is empty.
2. Remove the pipe fitting that runs from the fresh water tank to the inlet side of the water pump.
3. Install the pump converter valve to the pump inlet side using the supplied 1/2" FPT to 1/2" FPT fitting and Teflon tape.
4. Install the original inlet connection from the water tank to the pump converter valve using the supplied Teflon tape.
5. When it is time to winterize, attach the siphon hose to the valve and place the other end of the suction tube directly into a bottle of antifreeze.
6. Turn on pump to circulate the antifreeze.
⚠️ WARNING: This product can expose you to one or more chemicals known to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
