Home > LP Gas > LP Hoses >

JR Products 06-0194 1/4" ID OEM RV Appliance Gas Hose with Quick Disconnect -- 36 Inch

JR Products 06-0194 36-inch 1/4 inch ID OEM RV appliance rubber gas hose with quick-disconnect and male pipe thread ends, UL CSA approved
1/4" OEM RV Appliance Hose- 36"
 
List Price: $34.72
: $21.46
You save $13.26!
Part Number: 07-31105
Manufacturer: JR Products

Quantity in Stock :16

Availability: In Stock
Qty:

 
JR Products UL / CSA Approved 1/4" ID -- 36 Inch JR Products 06-0194 OEM RV Appliance Gas Hose -- 36"

A direct OEM-style replacement LP gas appliance hose for RVs. Thirty-six inches of 1/4" ID rubber hose connects your propane appliance to the coach supply line, with a 1/4" male pipe thread on one end and a 1/4" quick-disconnect male fitting on the other. UL and CSA listed for safe, code-compliant installs.

Drop-In OEM Replacement for RV LP Gas Appliances

When the original hose on your RV range, oven, cooktop, or other LP-fed appliance cracks, stiffens, or shows signs of wear, this JR Products hose restores the factory connection geometry without modification. The 36-inch length covers the typical reach from a coach gas supply stub-out to a built-in appliance, and both fittings are the standard 1/4" sizes found throughout North American RV propane systems.

The quick-disconnect male end lets you detach the appliance without tools -- useful during appliance swaps, maintenance, or winterization. The opposite 1/4" male pipe thread end mates with standard female pipe thread (FPT) fittings at the supply side. No adapters are required for most OEM applications.

1/4" ID Rubber Hose

Flexible rubber construction handles the vibration and movement typical of road travel without cracking or work-hardening over time.

Dual-End Fittings Included

1/4" male pipe thread (MPT) on one end and 1/4" quick-disconnect male fitting on the other -- no separate fittings to source.

UL and CSA Listed

Independently certified to Underwriters Laboratories and Canadian Standards Association requirements for LP gas hose in recreational vehicle applications.

36-Inch Ready-to-Install Length

Factory-measured 36" length matches the most common OEM appliance hose run, so you cut nothing and order nothing extra.

Where This Hose Is Typically Used

This hose is designed for the low-pressure LP gas side of RV propane systems -- downstream of the two-stage regulator where operating pressure is in the 11" water column (approximately 0.4 PSI) range typical for RV appliances. Common installation points include:

  • RV ranges and cooktops (two-burner or three-burner units)
  • RV ovens and range/oven combinations
  • Built-in RV gas grills or side-burner appliances
  • Any propane-fed appliance using a 1/4" quick-disconnect supply connection
Ready to Install: Both end fittings are pre-attached at the factory. This is a complete hose assembly -- just connect and go. No flaring, swaging, or assembly required.

Fitting Details

Getting the thread types right before ordering saves a return trip. Here is how the two ends are configured:

  • Supply end: 1/4" Male Pipe Thread (MPT / MNPT). This threads into a female pipe thread (FPT) port on a manifold, tee, or supply stub-out. Use yellow PTFE gas-rated tape or approved pipe dope on these threads.
  • Appliance end: 1/4" Quick-Disconnect Male. This pushes into the mating female quick-disconnect on the appliance inlet. No tools required to connect or disconnect.
Thread Sealant Note: Apply yellow-stripe PTFE tape (gas-rated) or an approved pipe thread sealant to the 1/4" MPT end before installation. Do not use standard white plumber's tape on LP gas fittings.

Replacement and Cross-Reference

This hose is also catalogued under JR Products part number 07-31105. If you pulled an existing hose with that number or with a label reading 06-0194, this is the correct replacement. JR Products supplies OEM hose assemblies to multiple RV manufacturers, so this part appears in a wide range of coaches originally built with 1/4" quick-disconnect propane appliance connections.

Maintenance Tip: Inspect LP gas hoses at least once per season. Look for cracking, flattening, kinking, or discoloration near the fittings. Any hose showing these signs should be replaced promptly regardless of age.

Product Specifications

ManufacturerJR Products
Part Number06-0194
Also Listed As07-31105
UPC756815625043
WarrantyLimited 90-day manufacturer warranty

Hose Dimensions

Inside Diameter (ID)1/4"
Overall Length36 inches
Hose MaterialRubber (LP gas rated)

Fitting Configuration

End 1 -- Supply Side1/4" Male Pipe Thread (MPT)
End 2 -- Appliance Side1/4" Quick-Disconnect Male
Thread StandardNPT (National Pipe Thread)

Certifications and Compliance

UL ListedYes
CSA ApprovedYes
ApplicationLP / Propane gas, RV appliance service

What Is Included

In the Box1x 36" rubber gas hose assembly with both fittings pre-installed
Not IncludedThread sealant, mounting hardware, adapters
Important Information -- Read Before Installing
  • This hose is rated for LP gas appliance service only. Do not use for high-pressure applications, natural gas systems, or any non-propane service.
  • Always shut off the LP gas supply at the tank valve before disconnecting or installing any gas hose.
  • After installation, check all connections with an approved leak-detection solution or electronic detector. Do not use an open flame to test for leaks.
  • Apply only gas-rated (yellow) PTFE tape or approved pipe dope to the 1/4" MPT end. Standard white plumber's tape is not approved for LP gas fittings.
  • Do not route the hose near sharp edges, heat sources, or moving parts without adequate protection.
  • Replace immediately if any cracking, kinking, abrasion, or fitting damage is found during inspection.
  • If you are unsure whether this hose matches your appliance connection, verify the quick-disconnect style (push-in female receiver) at the appliance inlet before ordering.


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Hoses
LP Gas