Keep your trailer rolling safely with a fresh outer bearing race matched to your 5200 lb hub assembly. This direct replacement from Lippert references the industry-standard LM67010 race and is built for routine bearing service intervals or whenever hub inspection reveals wear, pitting, or heat damage on the existing race.
The outer bearing race is the hardened steel cup that the outer bearing cone rides against inside your hub. When the cone wears, the race wears with it -- which is exactly why Lippert and every major bearing manufacturer recommend replacing the race and cone as a matched set, never one without the other. Mixing a new cone into a grooved or spalled race accelerates failure and puts your rig at risk on the road.
Lippert part 124292 is designed specifically for trailer hubs rated at 5200 lbs. It references manufacturer number LM67010, a well-known race designation used across a wide range of trailer axle assemblies. If you are servicing Lippert-branded axles or repackaging hubs on a trailer with 5200 lb rated axle assemblies, this race is the correct replacement component.
Designed and rated for 5200 lb trailer axle hub assemblies -- do not use on heavier-rated axles without verifying fitment.
Matches the LM67010 manufacturer reference number, making cross-referencing straightforward at the parts counter or online.
Always replace the outer bearing race with the outer bearing cone at the same service interval for maximum bearing life and safety.
Backed by Lippert's limited 1-year manufacturer warranty for confidence on every trip.
A used cone will rapidly damage a new race -- and vice versa. For correct bearing service, source the matching LM67010 outer bearing cone and replace both components at the same time. Repack with fresh grease and install a new grease seal to complete the service.
The bearing race (also called a bearing cup) is the outer hardened ring pressed into the hub bore. The tapered rollers of the bearing cone ride along its precision-ground surface. Both surfaces must be smooth and free of pitting, scoring, or heat discoloration. Any flat spots, grooves, or dark heat marks mean the race must be replaced before reinstalling the hub.
This listing is for the outer bearing race only. The matching outer bearing cone is sold separately. Verify your axle's exact bearing cone part number before ordering to ensure a complete, properly matched bearing service.