Home > Sanitation >

Camco Revolution Swivel Sewer Hose Extension 10 ft - Part CMC39623 - 15 Mil HTS Vinyl, 360-Degree Swivel Fittings

Camco Revolution CMC39623 10 ft swivel sewer hose extension in brown 15 mil HTS vinyl with 360-degree swivel lug and bayonet fittings
Camco Revolution Swivel Sewer Hose Extension - 10'
 
Alternative Views:


List Price: $33.49
: $27.99
You save $5.50!
Part Number: 39623
Manufacturer: Camco

Quantity in Stock :25

Availability: In Stock
Qty:

 
Camco 10 ft Extension 360-Degree Swivel Camco Revolution Swivel Sewer Hose Extension -- 10 ft (CMC39623)

Need more reach at the dump station, or replacing a worn section of your Revolution kit? This 10 ft extension adds length without adding frustration. Pre-attached swivel fittings rotate a full 360 degrees so the hose stays untwisted no matter how tight the hookup angle, and the heavy-duty 15 mil HTS vinyl collapses to just 2 inches for compact storage when you pack up and move on.

More Reach, Less Hassle at the Dump Station

Dump stations are rarely designed with your specific rig in mind. The sewer outlet is too far, the angle is awkward, or a previous hose section finally gave out. The Camco Revolution 10 ft Swivel Extension solves all three problems in a single piece. It snaps into any standard Revolution Kit or existing Revolution extension using the included swivel bayonet and lug fittings, and the wide-diameter bore keeps flow unrestricted so dumping is fast and complete.

The brown 15 mil HTS vinyl construction is thicker and more puncture-resistant than budget hoses, and it stays flexible in cooler temperatures -- an important detail for early-season or late-season campers. When you are done, the hose compresses down to a 2-inch storage length, fitting easily into a sewer hose storage tube or the included carrying bag if purchased as part of a full Revolution Kit.

360-Degree Swivel Fittings

Both the swivel lug and swivel bayonet rotate freely, eliminating hose twisting during hookup and allowing you to aim the outlet at any angle without fighting the hose.

15 Mil HTS Vinyl Construction

Heavy-duty high-tensile-strength vinyl is thicker than standard sewer hoses, resisting punctures, kinks, and cracking in cold weather conditions.

Collapses to 2 Inches

Ten feet of sewer hose compresses to a 2-inch storage length -- easy to stow in a bumper tube, storage bay, or dedicated hose bag between trips.

Free-Flow Bore

The non-restrictive interior diameter matches the Revolution system's full-bore design, allowing waste to clear quickly without back-pressure or slow drainage.

What Is Included

  • 1 x 10 ft Revolution sewer hose (15 mil HTS vinyl, brown)
  • 1 x swivel lug fitting (pre-attached, 360-degree rotation)
  • 1 x swivel bayonet fitting (pre-attached, 360-degree rotation)
System Compatibility: This extension is designed to connect directly to any Camco Revolution Swivel Kit (such as Camco 39741 or similar Revolution starter kits) and to other Revolution extension sections. The bayonet-and-lug coupling system is the Revolution standard -- it is not designed to connect directly to non-Revolution bayonet fittings without an adapter.

Common Uses

  • Extending a Revolution starter kit when the dump station inlet is farther than one hose length away
  • Replacing a cracked or failed 10 ft section in an existing Revolution hose system
  • Building a custom-length system by chaining multiple Revolution extensions end to end
  • Full-timers and frequent dumpers who need a reliable, quick-connect extension on hand
Chaining Extensions: Multiple Revolution extensions can be connected in series to reach very long dump station runs. Each section adds 10 ft of effective length. Camco recommends keeping the total assembled length practical for the flow rate of your tanks -- excessively long runs at low tank levels may drain slowly.
Storage Tip: Rinse the hose at the dump station before collapsing it for storage. Compressed to 2 inches, it slides neatly into a 4-inch diameter sewer hose storage tube or bumper cap. Allow the hose to fully drain before compressing to avoid trapping residual moisture inside the coils.
Warranty Note: This product carries a limited 90-day manufacturer warranty from Camco covering defects in materials and workmanship. The warranty does not cover misuse, damage from improper connections, or use outside of normal RV sewer applications.

Product Specifications

ManufacturerCamco
Vendor Part NumberCMC39623
Camco Part Number39623
UPC014717396233
SKU88-2575
ColorBrown
Warranty90-day limited manufacturer warranty

Hose Dimensions

Extended Length10 ft (120 inches)
Compressed LengthApproximately 2 inches
Hose DiameterStandard 3-inch RV sewer hose (nominal)
Wall Thickness15 mil HTS vinyl

Fittings Included

Inlet FittingSwivel lug -- 360-degree rotation, Revolution system standard
Outlet FittingSwivel bayonet -- 360-degree rotation, Revolution system standard
Fitting MaterialPlastic (ABS-type), pre-attached from factory
Coupling SystemCamco Revolution bayonet-and-lug (Revolution Kit compatible)

Compatibility

Compatible SystemCamco Revolution Swivel Sewer Hose Kit and extensions
Example Starter KitsCamco Revolution 15 ft, 20 ft, and 25 ft starter kits (Revolution series)
Use CaseExtension or direct replacement section
Non-CompatibleStandard (non-Revolution) Camco hose fittings without adapter

What Is in the Box

Sewer Hose1 x 10 ft Revolution hose, brown HTS vinyl
Swivel Lug1 x pre-attached, 360-degree swivel
Swivel Bayonet1 x pre-attached, 360-degree swivel
Not IncludedSewer hose support, storage tube, elbow adapter, gloves
Important Information
  • This hose extension uses the Camco Revolution bayonet-and-lug coupling system. It is NOT a direct drop-in replacement for standard (non-Revolution) Camco sewer hoses without a separate adapter fitting.
  • Intended for standard 3-inch RV black and gray water sewer dump use only. Not rated for pressurized lines or fresh water supply.
  • Always wear disposable gloves when handling sewer hose connections. Rinse the hose thoroughly before storage.
  • Inspect fittings and hose body before each use. Discard if cracking, splitting, or fitting damage is found -- a failed hose during dumping is a health hazard.
  • Warranty is limited to 90 days from date of purchase and covers manufacturing defects only.
  • A sewer hose support (such as Camco Slunky or Sidewinder, sold separately) is strongly recommended when using extended hose lengths to maintain proper downhill flow and prevent sagging.
Note: How to Choose the Right Sewer Hose for your Application
Choosing a sewer hose depends on how often you go RVing and the mil thickness of the hose. For instance, 1 mil is equivalent to .001 inches. If you are a full time RVer you may want to choose one that has a higher mil thickness and is heavy duty (currently the highest 26 mil), versus someone that occasionally RVs', they can go with a more standard smaller mil size (currently the lowest 8 mil).


Browse for more RV Accessories in the same category as this item:

Sanitation
Sanitation > Sewer Hoses & Fittings


$229.60
$22.46
$3.78