Ditch the 1 lb throwaway propane cylinder and run your portable appliance off your RV's onboard LP system instead. This 6-foot thermoplastic hose bridges a female quick-disconnect port on your RV piping to any small propane appliance with a CGA 600 connection -- giving you unlimited run time without swapping bottles.
The MB Sturgis Part No. 06-1400 (vendor) / 100476-72-MBS quick connect hose is purpose-built for RV owners who want to power portable propane appliances -- camp stoves, lanterns, portable heaters, griddles -- directly from their coach's LP system. One end terminates in a 1/4" Model 250 Male Quick Disconnect Plug that mates with any standard female quick-disconnect port on the RV piping side. The other end uses a CGA #600 connection, the same fitting found on 1 lb disposable propane cylinders, so it threads directly onto compatible appliances with no adapter needed.
At 72 inches (6 feet) of flexible thermoplastic hose, there is enough reach to use your appliance comfortably outside the coach while staying tethered to the RV's LP supply. The hose is rated to 350 PSI -- well above working pressures in a regulated RV LP system -- and carries full CSA/CGA 8.3 certification, meaning it has been independently tested to North American propane hose standards.
Threads onto any appliance designed for a 1 lb propane bottle -- no adapter or regulator required on the appliance side.
Model 250 plug mates with standard female quick-disconnect ports found on most RV LP distribution systems.
Heavy safety margin over typical RV LP system regulated pressures, providing dependable long-term service.
Rated from -40 F to 140 F (-40 C to 60 C), suitable for year-round use including cold-weather camping.
Most RVs equipped with a quick-disconnect port have a female quick-disconnect fitting plumbed into the exterior LP supply -- often near the kitchen area, at a dedicated outdoor cooking port, or on the LP manifold. When you plug in this hose, LP gas flows from your main tank through the RV regulator and into the hose at the correct appliance pressure. You do not need an additional regulator between this hose and your appliance, because the appliance's built-in orifice is already sized for the 11 inches water column pressure that comes out of an RV LP system regulator.
When not in use, simply unplug the quick-disconnect -- it seals automatically on the female port side, stopping gas flow. The CGA 600 end can be capped or left uncapped; no gas passes through unless the quick-disconnect is engaged.
Any portable LP appliance designed to accept a 1 lb propane cylinder via a CGA 600 threaded connection is compatible with this hose, including:
This hose is not intended for appliances that require a high-pressure supply upstream of a dedicated regulator (such as a full-size propane forge or a burner sized for a 5 lb or larger cylinder with its own regulator). For those applications, a different high-pressure LP hose with regulator assembly is required.