Eliminates the need for portable step stools. Attaches directly to any Gen 2 StepAbove® step to close the gap when the first step is too tall. Adjustable for 8" and 9" rise heights. 23.5" x 7" wide tread platform.
A tall first step is one of the most common entry frustrations for RV owners and passengers — and portable step stools are an awkward, unstable workaround that require constant repositioning and can easily tip. The MORryde STP54-075 Add-A-Step Tread is the permanent, integrated solution: it attaches directly to your existing Gen 2 StepAbove® step system to create an additional ground-level step that closes the gap between the bottom step and the ground.
The Add-A-Step Tread is adjustable to accommodate both 8" and 9" rise heights, and its 23.5" x 7" wide platform provides confident, stable footing on every entry and exit. Longer legs are included for extra height adjustment. Installation is quick-attach — no drilling, no permanent modifications to the step system — and the tread can be removed just as easily when not needed. It works only with MORryde Gen 2 StepAbove® steps (identifiable by their wider top step), and is not compatible with Flip Tread steps or LCI steps.
Permanently replaces the need for portable step stools — always attached, always stable, always in the right position
Adjustable legs accommodate both 8" and 9" rise heights — includes longer legs for additional height adjustment range
Attaches directly to any Gen 2 StepAbove® step — no drilling, no permanent modifications, easy to remove when needed
Full-width 23.5" platform matches the wide StepAbove® tread for a stable, confidence-inspiring step surface
The STP54-075 Add-A-Step Tread is designed exclusively for MORryde Gen 2 StepAbove® steps. MORryde explicitly states it is not compatible with: • Flip Tread Steps • LCI Steps • Gen 1 StepAbove® steps • Any non-MORryde step system How to identify Gen 2 StepAbove® steps: Gen 2 models are recognizable by their wider top step. If you are unsure whether your steps are Gen 2 StepAbove®, verify your step model before ordering. Also measure your step width: This wide version (STP54-075) has a 23.5" tread. If your steps are 19.5" wide (narrow models), see the STP54-076 Add-A-Step Tread Narrow instead.
MORryde requires you to measure your step tread width before ordering. The Add-A-Step Tread is available in two widths, and selecting the wrong one will result in a poor fit: STP54-075 (This Product) — Wide: 23.5" x 7" tread — for standard wide Gen 2 StepAbove® systems STP54-076 — Narrow: 19.5" x 7" tread — for narrow Gen 2 StepAbove® systems where the wide tread is not the right fit Measure the width of your existing step treads. If they are 23.5" wide, the STP54-075 is correct. If they are 19.5" wide, order the STP54-076 instead.
Setup Steps: 1. Verify Compatibility: Confirm you have Gen 2 StepAbove® wide steps (23.5" tread width) and that the system is not a Flip Tread or LCI step 2. Measure Your Rise: Determine whether your first-step rise is 8" or 9" to select the correct leg height setting 3. Set Leg Height: Adjust the Add-A-Step Tread legs to the 8" or 9" rise position — use the longer legs if additional height is needed 4. Attach to StepAbove® Step: Connect the Add-A-Step Tread to the bottom Gen 2 StepAbove® step using the quick-attach mechanism — no tools or drilling required 5. Verify Stability: Confirm the tread is securely attached and all legs are making solid ground contact before use Refer to MORryde's Add-A-Step Installation Instructions for complete step-by-step guidance and leg adjustment details.
In The Box: • Add-A-Step Tread Assembly — 23.5" x 7" wide platform • Adjustable Legs (8" and 9" rise settings) • Longer Legs for Extra Height Adjustment • Installation Instructions NOT Included: • Gen 2 StepAbove® step system (required — sold separately) Narrow Version Available: • STP54-076 — 19.5" x 7" Add-A-Step Tread for narrow Gen 2 StepAbove® systems
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV entry, safety, and specialty vehicle products.
Both models share the same adjustable rise (8" and 9"), quick-attach design, and Gen 2 StepAbove® compatibility. The only difference is tread width. Measure your existing step treads before choosing.
Contact MORryde at (574) 293-1581 or measure your existing step tread width to confirm which version is correct for your Gen 2 StepAbove® system.