Restore safe, confident footing on your RV entry steps with this self-adhesive anti-skid tape. The yellow, glow-in-the-dark surface provides daytime visibility and nighttime safety -- a must for campers who arrive or leave after dark. Sized to fit Kwikee motorized step treads straight out of the package.
Worn, smooth step treads are a leading cause of slips and falls on RV entry steps. Lippert part 380063 lets you add or replace a tread without tools, drilling, or professional installation. Peel the backing, align to the step, and press firmly -- the aggressive self-adhesive backing bonds to painted metal, aluminum, and composite step surfaces used on Kwikee and many other motorized step systems.
The yellow color maximizes contrast against dark step surfaces, and the photoluminescent (glow-in-the-dark) material charges in daylight and emits a soft glow for several hours -- enough to guide your footing during late-night arrivals or early-morning departures.
Self-adhesive backing installs in minutes -- no screws, rivets, or adhesive compounds required. Clean the step surface, peel, press, and done.
Photoluminescent yellow material absorbs ambient light and glows after dark, improving step visibility for nighttime entry and exit.
Textured abrasive face provides grip underfoot in wet or dry conditions -- especially important on entry steps exposed to rain, dew, and mud.
Sized at 33" x 8" to match standard Kwikee motorized step tread widths. Cross-references Kwikee part 909335000 and manufacturer reference 909540000.
This tape is designed for use on Kwikee electric step systems -- the most widely used motorized step brand on Class A, Class C, and fifth-wheel coaches. The 33" x 8" size matches the standard tread width on many Kwikee single-, double-, and triple-step assemblies. It is also suitable for any flat RV step surface that falls within those dimensions, including trailer entry steps and utility steps.
If you are replacing an existing worn tread, remove all residue from the previous adhesive using an adhesive remover or isopropyl alcohol before applying the new tape. Residue under the new tape will cause lifting and premature failure at the edges.