The MB Sturgis Inverted Flare Stainless Steel Pigtail will connect a dual LP cylinder system to a two-stage regulator. Provides a higher rate of flow resulting in a decreased potential for the system to go into bypass mode and therefore shutting down the gas supply to the system. - 1/4" ID stainless steel hose assembly.
- Includes a dark green RV type 1 tank connection with an internal backcheck to not allow a backflow gas leak.
- Inside Diameter: 3/8".
- Hose Length: 36".
- Meant for use with LP gas only.
- Max Flow Capacity: 200,000 BTU P/H.
- Temperature Range: -40°F to 140°F (-40°C to 60°C).
- UL569 / ANSI Z21-81 certified.
- UL/CGA approved.
- Weight: 0.5 lbs
- Limited 1-Year Manufacturer Warranty.
MB Sturgis Inverted Flare Stainless Steel Pigtail - 1" x 1/4" - 36" Hose
