700 lb capacity for ATVs and go-karts. 71.5" x 9.25" rails. Reversible. Wide tires. Ramps not included. 127 lbs. Made in USA.
The VersaHaul VH-90 is a heavy-duty ATV and go-kart carrier designed for hauling your quad or go-kart on road trips. This carrier is perfect for those who already have ramps and need a reliable platform. With a 700 lb capacity and two wide 71.5" x 9.25" carrier rails, the VH-90 accommodates ATVs and go-karts with wide tires.
The reversible rails allow loading access from either side, movable wheel stops provide perfect positioning, and the distance between rails and bumper is adjustable. **Important: This carrier does NOT include ramps - ramps must be purchased separately (VH-90 RK ramp kit recommended).** The VH-90 includes anti-tilt lock bracket, 50" main tube, 2 carrier tracks, 2 wheel stops, 2 reflectors, and 3 mounting brackets. Weighing 127 lbs with powder coat finish, the VH-90 is made in the USA and protected by US Patents (US D548,170 S, 20070052206).
Hitch Requirements: • Class III Hitch: Typically rated for 500 lbs tongue weight • Class IV Hitch: Typically rated for 1,000 lbs tongue weight • Receiver Size: Standard 2" receiver Vehicle Requirements: • Always verify your vehicle's tongue weight rating • Total tongue weight = VH-90 (127 lbs) + ATV/go-kart (up to 700 lbs) = up to 827 lbs Important: Ramps NOT included - must purchase VH-90 RK ramp kit separately.
This System Includes: • (1) Anti-Tilt Lock Bracket • (1) 50" Main Tube • (2) Carrier Rails (71.5" x 9.25") • (2) Wheel Stops • (2) Reflectors • (3) Mounting Brackets • Installation Instructions Carrier Specifications: • Model: VH-90 • Weight: 127 lbs • Capacity: 700 lbs • Rails: 71.5" x 9.25" IMPORTANT: Ramps NOT included. Purchase VH-90 RK ramp kit separately.
Download the VersaHaul VH-90 ATV And Go-Kart Carrier Instruction ManualInstallation: Connect 50" main tube to two carrier rails (71.5" x 9.25" each). Install anti-tilt lock bracket. Position wheel stops on carrier rails. Attach 3 mounting brackets for future ramp installation. Insert assembled carrier into 2" hitch receiver and secure with hitch pin. Attach reflectors. Distance between rails and bumper is adjustable. Loading: Deploy ramps (sold separately - VH-90 RK ramp kit recommended). Load ATV or go-kart onto carrier rails. Position between wheel stops. Secure with tie-down straps. Remove and store ramps. Important: Ramps NOT included - must purchase VH-90 RK ramp kit separately. Do not exceed 700 lbs capacity. Always verify vehicle's tongue weight rating.