Stop questionable campground water before it ever enters your RV. The Camco HL-200 mounts inline between your two supply hoses using standard garden hose fittings, and the included C-2063 cartridge tackles bacteria, heavy metals, hydrogen sulfide, chlorine, VOCs, lime and scale buildup, plus taste and odor problems -- all in a single, easy-to-swap canister.
Unlike undersink or inline refrigerator filters, the HL-200 is designed to sit at the pedestal -- between the campground spigot and your RV's city water inlet. Every drop that enters your rig passes through the C-2063 cartridge first, so your drinking water, shower, and appliances all benefit from filtered water.
Setup takes less than a minute: thread your supply hose onto the inlet, your RV hose onto the outlet, and you're done. The canister housing is built to withstand outdoor use and the included cartridge is field-replaceable without any tools -- just unscrew the canister bowl, swap the cartridge, and reseal.
Standard 3/4 in. garden hose male and female fittings on both ends. No adapters needed for typical RV hookup.
Included cartridge addresses bacteria, heavy metals, hydrogen sulfide, chlorine, VOCs, lime/scale, and taste and odor issues.
Delivers enough water pressure and volume for normal RV use without noticeable restriction at the faucet or shower.
Change the C-2063 cartridge annually or when flow drops noticeably -- no need to replace the entire housing assembly.
The C-2063 cartridge included with the 52141 uses a multi-stage filtration media designed for the contaminants most commonly found at campground water hookups:
The HL-200 is designed for exterior use and installs inline with your existing hose setup. A typical installation looks like this:
When it's time to change filtration media, Camco sells the C-2063 cartridge separately so you can continue using the same HL-200 housing year after year. Replacing the cartridge is straightforward: