- MicroSealant Technology.
- Low density polyethylene backing.
- Use on: glass, wood, aluminum, vinyl, OSB, polyethylene, polypropylene, polystyrene, Tyvek, fiberglass, brick, concrete, masonry, and virtually all construction materials.
- Seals window frame to virtually any surface.
- Can be applied in weather as cold as -20 degrees.
- Seals for an air, moisture and water-tight barrier.
- Dimensions: 6" width, 50' length.
- Made in USA.
RV WindowSeal 6" x 50' by EternabondThe EternaBond WindowSeal 6" x 50' bonds to virtually all construction metals, wood, vinyl, OSB, metal, aluminum, brick, concrete, even glass. It can be applied in temperatures as low as -20 degrees and the seal will remain flexible and will not dry up and fall off over time.
Tight Seal For Your RV WindowsIf you're looking for an easy do it yourself way to seal your windows on your RV, motor home or camper, this RV window seal tape would work perfect for you. It makes a permanent water-tight seal using adhesives with integrated primers and is made to form a seal between the window and the exterior sheathing with its polyethylene film, coated with MicroSealant.
Uses MicroSealant Technology This window seal uses advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built in primer. Before applying, the surface must be clean and dry. For application, install over the repair area, removing the protective liner as you go, to prevent the tape from getting stuck to itself or debris. Using pressure, rub with hand or roll with steel roller to activate bonding process.
Technical Specs.Application temperature: 150°F to -20°F ambient
Bacteria Resistance: Excellent
Flexibility: ½" radius at -20°F
Low Temperature Flexibility: Excellent
Fungal Resistance: Excellent
Peal Adhesion: 135 oz/in width
Sag Rating: >200ºF
Shelf Life: Up to 5 years
Roll Size: 6" x 50'
Temperature Flexibility Range: -70°F to >200°F
Total thickness: 20 mils
Water Absorption: Less than .05%