How to Install in Cold Weather
02/09/2015 Back to RV Accessories Article Home

Tools required: EternaBond® DoubleStick, EternaBond® RoofSeal and EternaPrime®

Step 1. After marking the hold cutting it, coat the tape contact once in EternaPrime®. Allow to dry (30 min). Do not use EternaPrime® on PVC. To install EternaBond® on PVC in cold temperatures (40°F or below), go to PVC and EternaBond®.
Step 2. Put DoubleStick on the foot of the curb (underside).
Step 3. Set in place and secure it down.
Step 4. Counter flash the cone with RoofSeal.
Step 5. Finished!