Stop buying and swapping 1 lb propane cylinders. This 10-foot thermoplastic hose taps your RV's bulk LP system and delivers propane directly to small appliances -- camp stoves, lanterns, tabletop grills -- using a clean, tool-free quick connect. One connection at the RV, one at the appliance, done.
The MB Sturgis 100476-120-MBS hose is designed for RVers who regularly use small propane-powered appliances and want to stop relying on disposable 1 lb cylinders. At 120 inches (10 feet), it gives you enough reach to set up a camp stove or lantern well away from the coach while staying connected to your onboard LP supply.
One end of the hose features a 1/4" Model 250 male quick disconnect plug that mates with a Sturgi-Stay female quick disconnect fitting already installed on your RV's LP system. The other end terminates in a male 1"-20 (CGA #600) fitting, which is the standard connection used on most Coleman-style and other 1 lb bottle-compatible appliances.
Feeds small LP appliances directly from your RV's bulk propane tank -- no more disposable bottles.
Rated well above typical RV LP system operating pressures for reliable, safe use.
1/4" Model 250 male plug connects and disconnects instantly to a Sturgi-Stay female quick disconnect -- no tools needed.
Rated from -40 deg F to 140 deg F, suitable for cold-weather camping and hot summer use.
Understanding both ends of this hose before you buy saves a return trip:
Many Coleman stoves and appliances have a single-burner or dual-burner body that accepts a 1 lb bottle but may need a T-fitting to properly secure or split the supply connection. If you are connecting to a Coleman product, a T-fitting may need to be purchased separately depending on the specific appliance model.
The 1/4" ID thermoplastic hose is rated specifically for LP gas service. Thermoplastic construction provides flexibility in cold temperatures while resisting the permeation common in lower-grade hose materials. The hose assembly is rated for propane use only -- do not use with natural gas, air, or other gases.
A successful installation requires a Sturgi-Stay female quick disconnect fitting already plumbed into your RV's LP system at a convenient exterior or pass-through access point. If your rig does not have one installed, the female fitting must be added first -- typically by a certified LP technician. Once the female port is in place, the hose connects and disconnects in seconds without any tools or thread sealant.