Replacement switchgear box and harness for a single hydraulic jack with a round, white 4 pin pump connector. Includes pump connector harness adapter.
The EQ Systems 7814 is the factory replacement switchgear box and wiring harness for EQ Systems single hydraulic jack installations that use a round, white 4 pin connector at the pump. This is the connector point where the switchgear plugs into the pump assembly. The 7814 ships complete with a pump connector harness that adapts directly to the round, white 4 pin connector on your existing pump — no additional adapter is required for standard installations.
Before ordering, confirm your pump's connector type is a round, white 4 pin. If your pump uses a square, black 4 pin connector, you will need a different switchgear part. Use the EQ Systems Switchgear Replacement Chart or contact EQ Systems support to verify the correct part for your system.
If your motor solenoid has 2 plug-in connectors (a 2 pin and a 4 pin), the solenoid must also be replaced when installing the 7814. In this case, you will also need to purchase part #7055 (solenoid). Failure to replace the solenoid along with the switchgear on these pump configurations will result in an incomplete repair. If your solenoid has only a single connector, the 7814 alone is sufficient.
The 7814 is specifically for pumps with a round, white 4 pin connector. This is the connector where the switchgear harness plugs into the pump. This is NOT the correct part if your pump has: • A square, black 4 pin connector (see part #6526) • A dual-switch configuration (see part #7815) If you are unsure of your connector type, contact EQ Systems at 1-800-846-9659 or reference the EQ Systems Switchgear Replacement Chart to identify the correct part.
Not sure you have the right part? Here's how nearby switchgear models differ: • #7814 (this part) — Single switch, round white 4 pin connector • #7815 — Dual switch, round white 4 pin connector • #6526 — Single switch, square black 4 pin connector The connector shape and color on your pump determines which switchgear you need. When in doubt, contact EQ Systems support to confirm the correct replacement.
Technical Support: EQ Systems Toll Free: 1-800-846-9659 Local: 574-264-3437 Hours: Monday–Friday, 7AM–4PM EST Manufacturer: EQ Systems — 19300 Grange St, Cassopolis, MI 49031