Eaz-Lift gooseneck stabilizer tripod jack for reducing front-end trailer movement while parked, with 30" to 44" height adjustment and 7,500 lb maximum load capacity.
The Camco 48850 Eaz-Lift Gooseneck Stabilizing Jack is designed to help reduce unwanted trailer movement while parked. It supports the front gooseneck area of a horse trailer, gooseneck trailer, or fifth-wheel trailer equipped with a gooseneck adapter, helping minimize side-to-side and front-to-back motion during campsite or storage setup.
This tripod-style stabilizer adjusts from 30" to 44" and uses a 2-5/16" ball to connect at the trailer coupler. Heavy-duty steel construction, large footpads, and zinc-plated chains help create a stable support point under the trailer nose without replacing the trailer’s landing gear, jacks, or required wheel chocks.
Helps minimize front-end trailer movement while the trailer is parked
Adjusts from 30" to 44" to fit a range of gooseneck trailer setups
Rated for up to 7,500 lb maximum load capacity when used properly
Wide footpads and stabilizing chains help improve support on stable surfaces
This product is a stabilizing jack, not a lifting jack or landing gear replacement. It is designed to reduce movement while the trailer is parked and properly supported. Always chock wheels, use landing gear or jacks as required, and follow your trailer manufacturer’s setup instructions. This stabilizer is not compatible with Andersen Ultimate hitch setups.
The 48850 is Camco’s Eaz-Lift gooseneck stabilizer tripod jack. Part Number: • 48850 UPC: • 014717488501 Common Alternate References: • 15-3560 • 66-48850 Designed for gooseneck trailers and fifth-wheel trailers with a gooseneck adapter installed.
In The Box: • One Camco 48850 Eaz-Lift gooseneck stabilizer tripod jack • Integrated 2-5/16" ball • Stabilizing chains • Large footpads • Crank handle / adjustment hardware Not Included: • Trailer landing gear or leveling jacks • Wheel chocks • Jack pads or ground pads • Gooseneck adapter • Hitch components Use this stabilizer as part of a complete safe parking setup, not as a replacement for proper trailer support or wheel chocking.
Stabilizing Overview: 1. Park Safely: Park the trailer on a stable surface and chock the wheels before setup. 2. Support Trailer Properly: Make sure the trailer is already supported by its landing gear or required jack system. 3. Position Tripod: Place the stabilizer under the gooseneck coupler area. 4. Connect Ball: Align the 2-5/16" ball with the compatible coupler connection. 5. Adjust Height: Use the crank handle to raise the stabilizer until it is snug and supporting the gooseneck area for stabilization. 6. Set Chains: Confirm the stabilizing chains and legs are properly positioned. 7. Check Stability: Verify the trailer is stable before entering, loading, or moving around inside.
The Camco 48850 Gooseneck Stabilizing Jack is a practical add-on for trailer owners who want to reduce motion at the front of a parked gooseneck trailer or fifth wheel with a gooseneck adapter installed.
Before placing your order, measure your parked coupler height, confirm your trailer uses a compatible 2-5/16" gooseneck connection, and verify that your setup is not equipped with an Andersen Ultimate hitch. This stabilizer is for reducing trailer movement while parked and should not be used as a lifting jack or replacement for landing gear.