A direct OEM-style replacement hose for LP gas appliances in RVs and travel trailers. The 06-0331 delivers six feet of flexible 1/4" ID rubber hose with ready-to-use quick disconnect male and coupler ends -- no extra fittings needed. UL and CSA listed for LP gas service, so it meets the safety standards required by most manufacturers and inspectors.
When your RV range, cooktop, oven, or other LP gas appliance needs a fresh supply line, the JR Products 06-0331 is an exact-fit OEM-style solution. At 72 inches (6 feet) long, it provides enough reach to route cleanly from a gas manifold or shutoff valve to your appliance without splicing or adapting.
Both ends come pre-installed: a 1/4" quick disconnect male fitting on one end and a 1/4" quick disconnect coupler on the other. These snap together without tools, making initial installation and future disconnects fast and leak-free when proper mating fittings are present on your appliance and gas line.
Male and coupler quick disconnect fittings are pre-installed on both ends -- no extra hardware required for standard 1/4" QD connections.
Six feet of hose gives you flexibility to route around cabinet framing, slides, and chassis obstructions without kinking or forcing tight bends.
Meets Underwriters Laboratories and Canadian Standards Association requirements for LP gas service -- required for most RV appliance installations and inspections.
Built to JR Products' OEM specifications, matching the construction standards of factory-installed gas hoses in many production RVs and trailers.
The 06-0331 is designed for low-pressure LP gas appliance connections inside an RV. Common applications include:
The 1/4" quick disconnect system used on this hose is a common standard in RV LP gas plumbing. The male end inserts into a female receiver on the appliance or manifold and locks with a positive click. The coupler end accepts a male fitting from the gas supply side. Both ends include internal valves that close automatically when disconnected, helping minimize gas escape during servicing.
The hose body is 1/4" ID rubber rated for LP (liquefied petroleum) gas service. The rubber construction provides flexibility for routing through tight cabinet spaces while resisting the degradation that LP gas contact can cause in non-rated hose materials. At 72 inches, there is ample length to avoid sharp bends that can stress the hose wall or restrict flow.
JR Products covers the 06-0331 with a limited 90-day warranty against defects in materials and workmanship from the date of purchase.