60-amp replacement converter section for a Progressive Dynamics PD4560 all-in-one distribution panel, built with the brand's Charge Wizard technology to recharge your RV battery to 90% in as little as 3 to 6 hours.
The PD4560CSV is a 60-amp replacement converter section for the Progressive Dynamics PD4560 all-in-one AC/DC distribution panel, part of the Inteli-Power 4500 series. It converts 105-130 volt AC power down to 13.6 volt DC, delivering up to 1,000 continuous watts at 80% efficiency to keep your RV's battery charged and your 12-volt system powered.
Built-in Charge Wizard technology automatically cycles through four charging modes to protect your battery's long-term health while still charging it quickly: a Boost mode for rapid charging up to 90%, a Normal mode to safely finish the charge, a Storage mode to maintain charge with minimal water loss, and a periodic Equalization mode to help prevent battery stratification and sulfation.
Continuous power output at 80% efficiency
4-stage charging protects battery health long-term
Reverse battery, thermal, and high/low voltage protection
Designed, assembled, and tested in Marshall, Michigan
This is a replacement converter section designed to install into an existing Progressive Dynamics PD4560 all-in-one distribution panel — it is not a complete standalone distribution panel by itself. The full panel accommodates up to 12 branch circuit breakers plus a center-feed dual 50-amp main breaker. Model: PD4560CSV | Series: Inteli-Power 4500
Verify your existing converter is defective and out of warranty before purchasing a replacement section. This part is intended to replace the converter section within an existing PD4560 panel, so confirm your current setup matches before ordering. Many retailers treat this item as non-returnable once mounted or wired.
In The Box: • PD4560CSV Replacement Converter Section