Store your travel trailer with confidence. ADCO's Designer Series SFS AquaShed cover wraps your rig in triple-layer polypropylene engineered to shed rain, block UV, and breathe -- so moisture, mold, and mildew don't get a foothold during off-season storage. This is the right-size cover for coaches measuring 26 feet 1 inch through 28 feet 6 inches in length.
ADCO updated the Designer Series with 30% more SFS AquaShed material on the top panel compared to earlier generations. That means the portion of the cover that takes the most punishment -- rain, sun, debris -- now has a thicker, more durable shield. The triple-layer polypropylene construction beads water on contact while still allowing trapped moisture and condensation to escape from underneath, which is critical for long-term storage in moderate climates.
The grey and white multi-tone color is designed to reflect solar heat and reduce interior temperature buildup. Reinforced front corners resist the snagging and tearing that can happen during installation or when wind works at the edges over time.
30% more SFS AquaShed material versus prior versions. Sheds rain aggressively while resisting UV degradation on the most exposed surface of the cover.
Triple-layer polypropylene sides allow vapor to escape, preventing the trapped humidity that causes mold and mildew on sidewalls, seams, and roof edges.
Front and rear buckle cinching removes slack and keeps the cover drum-tight. Bottom strap and buckle system anchors the cover against wind lift without requiring stakes or bungees.
Zipper entry panels let you reach storage compartments, shore power hookups, or the hitch without removing the entire cover -- a genuine time-saver during short storage breaks.
ADCO ships this cover ready to install. Everything you need for a complete, secure fit is in the box:
The weighted toss-under buckle is the feature most installers appreciate most on first use. Rather than crawling under the coach to retrieve loose straps, you toss the weighted end underneath and it carries the strap to the other side for you. Combined with the front/rear buckle cinch and the bottom strap system, a single person can install this cover without a ladder helper in most cases.
Reinforced front corners are pre-built into the cover to protect against the snagging that typically occurs at the A-frame nose of a travel trailer. Ladder cap protection keeps the cover material from abrading against metal ladder rungs during installation and over the storage period.
This specific cover (Part 52244, SKU 01-0239) is designed for travel trailers 26 feet 1 inch to 28 feet 6 inches in total length. Measure your trailer from the front of the A-frame hitch coupler to the rear bumper. The cover itself measures 28.75 feet long x 100 inches wide x 102 inches tall -- that extra length provides overlap at both ends for a secure fit within the rated range.
If your trailer falls outside this range, ADCO makes the Designer Series SFS AquaShed in multiple length bands. Using a cover that is too short will leave ends exposed; using one that is too long creates excess material that can flap and abrade in wind. Always match the length band to your actual trailer measurement.