Protect your Class C motorhome between trips with ADCO's Designer Series SFS Aquashed cover. Engineered with 30% more SFS Aquashed material than previous generations, this cover delivers triple-layer moisture defense on top and durable polypropylene panels on the sides -- keeping rain, UV rays, and humidity away from your paint, seals, and roof while still allowing the rig to breathe and resist mold buildup.
The Designer Series SFS Aquashed cover is ADCO's mid-tier solution for RV owners storing in moderate climates who want meaningful weather resistance without moving up to a full polypropylene or Tyvek cover. The triple-layer SFS Aquashed top panel sheds water on contact while remaining breathable enough to prevent the trapped moisture that causes mildew under lesser covers.
Side panels use triple-layer polypropylene construction -- lightweight, tear-resistant, and UV-stabilized. The multi-tone gray colorway is designed to reflect solar energy and reduce heat buildup inside a stored coach.
30% more SFS Aquashed material than the previous generation. Beads water on contact and resists high-humidity environments.
Polypropylene side panels block harmful UV rays. Breathable construction prevents moisture trapping that leads to mold and mildew growth.
Front and rear buckle cinching removes slack. Bottom-mounted strap and buckle system locks the cover down to prevent wind loss.
Zipper entry panels allow door and compartment access during storage. Weighted buckle toss-under simplifies solo installation under the coach.
The top panel uses ADCO's proprietary SFS (Super Duty Fabric System) Aquashed weave -- a tri-layer laminate that combines a spunbond outer face, a water-resistant middle film layer, and a soft inner face that will not scratch your roof surface. The side panels are triple-layer spunbond polypropylene, the same material used across ADCO's mid-range line.
Reinforced front corners are a notable upgrade -- they resist the snags and tears that commonly develop at the leading edge of a cover during installation or when wind causes flutter. All stress points are bar-tacked for added durability.
Installation is designed to be manageable for one or two people. ADCO recommends a two-person install for a coach in this size range. The weighted toss-under tool makes routing the underbelly straps significantly easier than trying to slide under the coach. Zipper panels on the driver and passenger sides allow you to continue accessing compartments and entry doors after the cover is on, so you do not need to remove the entire cover for occasional access during a long storage period.
This cover is recommended for moderate climates and short-term to medium-term storage. It provides solid protection against rain, humidity, UV, and light debris. For prolonged storage in extreme sun (desert Southwest), heavy snowfall regions, or coastal salt-air environments, ADCO offers higher-spec covers in the Tyvek or Supreme Shield lines. This Designer Series cover is an excellent choice for seasonal storage in the Pacific Northwest, Midwest, or Southeast.
This cover (part 52845 / SKU 01-0269) is sized for Class C motorhomes measuring 29 feet 1 inch up to 32 feet in length. Measure your coach from the front cap to the rear bumper -- do not include a toad or tow bar. The cover dimensions are 32ft long x 102 inches wide x 114 inches tall, providing enough material to wrap around the full profile of a standard Class C chassis in this length range.
ADCO produces the Designer Series SFS Aquashed cover in multiple sizes for Class C motorhomes. Verify your exact coach length before ordering -- the cover will not install correctly or provide adequate protection if undersized, and an oversized cover creates excess material that flaps and wears prematurely.
Measure your complete coach length before ordering. ADCO offers adjacent sizes in the Designer Series Class C line. This cover fits 29ft 1in through 32ft. A coach at exactly 29ft falls into the smaller size; a coach at 32ft 1in requires the next size up.