700 lb capacity for ATVs and go-karts. 71.5" x 9.25" rails. 60" x 8.15" ramps included. Reversible. Wide tires. 166 lbs. Made in USA.
The VersaHaul VH-90 RO is a heavy-duty ATV and go-kart carrier designed for hauling your quad or go-kart on trips without needing a bulky trailer. This complete system includes loading ramps for easy loading and unloading. With a 700 lb capacity and two wide 71.5" x 9.25" carrier rails, the VH-90 RO accommodates ATVs and go-karts with wide tires.
The carrier features reversible rails for loading access from either side, movable wheel stops for perfect positioning, and adjustable distance between rails and bumper. The VH-90 RO includes two 60" x 8.15" ramps, anti-tilt lock bracket, 50" main tube, 2 carrier tracks, 2 wheel stops, 2 reflectors, and 3 mounting brackets. Weighing 166 lbs (127 lbs without ramps) with powder coat finish, the VH-90 RO is made in the USA and protected by US Patents (US D548,170 S, 20070052206).
Hitch Requirements: • Class III Hitch: Typically rated for 500 lbs tongue weight • Class IV Hitch: Typically rated for 1,000 lbs tongue weight • Receiver Size: Standard 2" receiver Vehicle Requirements: • Always verify your vehicle's tongue weight rating and payload capacity • Total tongue weight = VH-90 RO (166 lbs) + ATV/go-kart (up to 700 lbs) = up to 866 lbs Hitch Limitations: • Most Class III hitches: 500 lbs tongue weight - limits ATV/go-kart to approximately 334 lbs (500 - 166) • Most Class IV hitches: 1,000 lbs tongue weight - adequate for full 700 lb capacity
This Complete System Includes: • (1) Anti-Tilt Lock Bracket • (1) 50" Main Tube • (2) Carrier Rails (71.5" x 9.25") • (2) Wheel Stops • (2) Reflectors • (2) Loading Ramps (60" x 8.15") • (3) Mounting Brackets • Installation Instructions Carrier Specifications: • Model: VH-90 RO • Weight: 166 lbs (with ramps), 127 lbs (without ramps) • Capacity: 700 lbs • Rails: 71.5" x 9.25" • Ramps: 60" x 8.15"
Pre-Installation Requirements: 1. Verify ATV/go-kart weighs 700 lbs or less 2. Check vehicle tongue weight rating (must handle 866 lbs minimum) 3. Verify ground clearance for ramp deployment 4. Review complete VH-90 instruction booklet Installation Overview: Connect 50" main tube to two carrier rails (71.5" x 9.25" each). Install anti-tilt lock bracket. Position wheel stops on carrier rails. Attach mounting brackets. Insert assembled carrier into 2" hitch receiver and secure with hitch pin. Attach reflectors. Two-person installation recommended due to 166 lb weight. Reversible Rails Feature: Rails can be reversed for loading from either driver or passenger side. Configure for best access. Distance between rails and bumper is adjustable. Loading Your ATV or Go-Kart: 1. Deploy 60" x 8.15" loading ramps 2. Ensure ramps are stable and secure 3. Slowly drive or roll ATV/go-kart up ramps onto carrier rails 4. Position between wheel stops 5. Secure with tie-down straps to carrier 6. Remove and store ramps in vehicle 7. Verify ATV/go-kart stability Driving with Loaded Carrier: • Accelerate gradually - 866 lbs tongue weight affects handling • Brake earlier - stopping distance increases • Turn carefully - wider turns required • Watch ground clearance - avoid steep driveways, speed bumps • Monitor constantly - check ATV/go-kart remains secured Important Safety Notes: • DO NOT exceed 700 lbs capacity • ALWAYS use tie-down straps to secure ATV/go-kart • NEVER exceed vehicle's tongue weight rating