Blue Streak Thetford Aqua-Magic STYLE PLUS & STYLE LITE Installation

Thetford Aqua-Magic® STYLE PLUS

1. Remove the stool to access the back.

A. Remove plastic shroud around base.
B. Remove two bolts (one on each side).
C. Remove water line located at rear of stool. (MAKE SURE WATER IS OFF).

2. Locate flush line between vacuum breaker and bowl.

A. You will need a piece of ½" ID clear vinyl tubing about 1 ¼" long. (Not provided)
B. Remove vacuum breaker from back of stool. [Photo View 1]
C. Install t-valve inline with arrow pointing towards the bowl. [Photo View 2]
(T-valve will not work if installed backwards)
D. Reinstall vacuum breaker.

3. Reinstall stool making sure all gaskets, bolts and water connections are secure.

[View 1]

[View 2]

4. Mounting the dispenser reservoir to the wall.

A. Locate reservoir to the back or side of the wall providing easy access for filling.
B. Keep level or lower than back of stool.
[Photo View 3]
C. Screw reservoir into place with the three screws provided.

[View 3]


A. Check water line for leaks.
B. Check stool by flushing.
C. Add a few ounces of Blue Streak Chemical to reservoir.
D. Flush stool. Finish filling reservoir.