Home > Dinghy Towing > Tow Bar Accessories >

Readybrake BCD-110 Brake Circuit Disconnect
Readybrake BCD-110 Brake Circuit Disconnect
Readybrake BCD-110 Brake Circuit Disconnect

: $39.95
MFG P/N: BSD-100
MFG: nsa RV Products
UPC #: 887337016917
Weight (lbs): 2

Ships in 1-2 Business Days
Product Code: BCD-110

DESCRIPTION Instructions
The Readybrake Brake Circuit Disconnect BCD-110 by NSA RV Products disconnects the signal being sent by the towed vehicles brake pedal while being towed. Each Brake Circuit Disconnect comes complete with 30 amp. relay, 4- 5 ft. 14 gauge leads and complete installation instructions with wiring schematic. The Brake circuit disconnect may be used with any braking system which activates the towed vehicles brake pedal, when the towed has turn signal lamps which are separated from the brake signal lamps. For more detailed information as to why this may be required you can request the product information sheet.

Please Note The Break Circuit Disconnect should be installed by a qualified professional

Readybrake BCD-110 Brake Circuit Disconnect

Additional Product Information
This Brake Circuit Disconnect will prevent brake signal over ride when installed properly and according to the manufactures instructions. Your coach has turn signals, brake lights, back up lights, and hazard lights which all run to the coaches tail lights. These signals are also sent by way of the motor homes wire harness to the rear of the coach to allow for the towed vehicle to carry these same signals to the towed vehicles tail lights. Once properly hooked up the towed vehicle will brake lights, turn signals and hazard lights sent from the motor home to the towed vehicles tail light.